Tiny Robot. Big Moves.
TROTPOD is a downloadable engineering prototype for building a four-legged robot. It includes original firmware, editable CAD, 3D-print files, wiring, calibration and STEM activities. Physical parts and printing are separate. Physical hardware validation is pending; this digital kit is an engineering prototype that requires calibration and testing.
Why it's different
What makes it special
Eight servo channels and a four-phase gait
Password-protected local browser controller
Animated 64×32 OLED face
Safe startup, stop and motion watchdog
What you'll learn
- Servo PWM and gait phasing
- Safe power distribution
- UART and local Wi-Fi control
- 3D-print tolerance
Choose your components
Build TROTPOD — Mini Wi-Fi Quadruped Robot DIY Project Kit: Complete Components Kit
Select the hardware you need, then add your selected components to your RoboSixLab shopping cart. Untick anything you already own.
Tools you'll need
- Multimeter
- Soldering station
- Small screwdriver
- 3D printer or printing service
- USB cables
Tools are not included in the pack or the component list.
Need the parts printed?
The digital guide does not include physical parts. Request a separate 3D printing quote for this project's STL files.
Straight answers
Before you unlock
Are components included?
No. This is a digital DIY kit; components and printing are separate.
Is the robot physically tested?
No. Physical hardware validation is pending. This digital kit is an engineering prototype; builders must verify fit, wiring and motion on their own hardware.
Can I use a phone?
Yes. Join the robot's local Wi-Fi access point and open its controller page.