A weather station is the cleanest introduction to IoT there is: a real measurement, taken in the room you are sitting in, travelling over WiFi to a dashboard you can open from anywhere.
The NodeMCU does all of it. It reads the BME280 over I²C, prints to a small OLED so the device is useful even offline, and posts the readings to a free cloud dashboard every minute. Once it works, the same pattern carries any sensor you like — soil moisture for a plant, gas for a kitchen, light for a greenhouse.
What you'll learn
- Talking to I²C sensors and sharing one bus between two devices
- Connecting an ESP8266 to WiFi and handling reconnects
- Sending data to a cloud dashboard over HTTP
- Drawing readable text on a 128×64 OLED
Choose your components
Build IoT weather station on your phone: Complete Components Kit
Select the hardware you need, then add your selected components to your RoboSixLab shopping cart. Untick anything you already own.
Tools you'll need
- Soldering iron for the header pins
- Micro-USB cable
- A free ThingSpeak or Blynk account
Tools are not included in the pack or the component list.