This is the build almost every robotics journey starts with, and for good reason: in an afternoon you go from a box of parts to a machine that makes its own decisions.
The logic is honest and small. An ultrasonic sensor pings the wall ahead and times the echo. If the wall is closer than 20 cm the Arduino stops, backs up, swings the sensor left and right on a servo, compares the two distances and turns towards whichever side has more room. That is the whole brain, and it fits in about forty lines of code.
Everything here is reusable. The same chassis becomes a line follower, the same motor driver runs a robot arm, and the sensor ends up in a parking-assist project later in the year.
What you'll learn
- Wiring a motor driver to an Arduino without magic smoke
- Reading an ultrasonic sensor and converting echo time to centimetres
- Writing a decision loop: sense, think, act
- Powering motors and logic from one battery pack safely
Choose your components
Build Obstacle-avoiding robot car: Complete Components Kit
Select the hardware you need, then add your selected components to your RoboSixLab shopping cart. Untick anything you already own.
Tools you'll need
- Small Phillips screwdriver
- Double-sided tape or zip ties
- USB cable for programming
Tools are not included in the pack or the component list.