Waveshare

Waveshare PCIe to 4-Port SATA 3.0 Expander Card 6Gbps High-Speed Adapter For Raspberry Pi CM4 - RS2055

SKU RS2055

PCIe to 4-channel SATA expansion card supports PCIe Gen3 x1, the maximum speed of a single channel is 6Gbps. Onboard SATA host controller (AHCI) with upstream PCIe Gen3 x1 and

₹2773.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

PCIe to 4-channel SATA expansion card supports PCIe Gen3 x1, the maximum speed of a single channel is 6Gbps. Onboard SATA host controller (AHCI) with upstream PCIe Gen3 x1 and downstream four SATA Gen3 ports. It's a low-latency, low-cost cost and low-power AHCI controller. With four SATA ports and cascaded port multipliers, the PCIe TO 4-Ch SATA 3.0 Expander can enable users to build up various high-speed IO systems, including servers, high-capacity system storage, or surveillance platforms.

Features:

Supports single-channel PCI Express.

Four power-saving modes of L0s/L1/L23/L3.

Supports L1 sub-state deep power-saving mode.

PCIe TO 4-Ch SATA 3.0 Expander supports SRIS, AER, and LTR.

Supports SATA LED.

Supports NCQ and AHCI SPEC 1.4.

Four SATA3.0 (6Gbps) ports.

Supports port multiplier command-based switching.

Supports SATA Partial/Dormancy power management.

Does not support direct access to the PC motherboard.

Supporting 5V and 12V SATA HDDs (2.5" and 3.5" HDDs), but it does not support the M.2 interface.

Useful Link:

Waveshare PCIe TO 4-Ch SATA 3.0 Expander

Package Included:

1 x PCIe TO 4-Ch SATA 3.0 Expander

1 x SATA Adapter Cable

1 x Screws pack

Supports single-channel PCI Express.

Four power-saving modes of L0s/L1/L23/L3.

Supports L1 sub-state deep power-saving mode.

PCIe TO 4-Ch SATA 3.0 Expander supports SRIS, AER, and LTR.

Supports SATA LED.

Supports NCQ and AHCI SPEC 1.4.

Four SATA3.0 (6Gbps) ports.

Supports port multiplier command-based switching.

Supports SATA Partial/Dormancy power management.

Does not support direct access to the PC motherboard.

Supporting 5V and 12V SATA HDDs (2.5" and 3.5" HDDs), but it does not support the M.2 interface.

More in Raspberry Pi Boards

You might also need