12V 8-Channel Relay Module Control Panel Plc for Arduino Avr Arduino Raspberry Pi and Other Mcu - NA195/RS4586

SKU NA195

The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. Each channel of the module can be set up by a high jumper or low-level trigger.

₹547.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Maximum load: AC 250V/10A, DC 30V/10A.

The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.

Working voltage is 12V.

Each channel of the module can be set up by a high jumper or low-level trigger.

Fault-tolerant design, even if the control line is broken, the relay will not act.

Power indicator (green), 8 relay status indicator (red).

The interface design is humanized, all interfaces can be directly connected through the terminals, so it is very convenient.

Module size: 142mm x 50mm x 18.5mm (length x width x height).

Description:

Maximum load: AC 250V/10A, DC 30V/10A.

The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.

Working voltage is 12V.

Each channel of the module can be set up by a high jumper or low-level trigger.

Fault-tolerant design, even if the control line is broken, the relay will not act.

Power indicator (green), 8 relay status indicator (red).

The interface design is humanized, all interfaces can be directly connected through the terminals, so it is very convenient.

Module size: 142mm x 50mm x 18.5mm (length x width x height).

There are 4 fixed bolt holes, holes 3.1mm, spacing 67mm x 44.5mm

Module interface:

1. DC+: Connect the power positive pole 2. DC-: Connect the power negative pole. 3. IN1-IN8: According to the setting of each way, the corresponding relay-operating can be controlled by a high or low level. Relay output: there is a 24 wire interface, all interfaces can be directly connected to lead to facilitate user use.

1. NO1--NO8: Relay normal open, the relay suspends before pulling in, and then short-connect with the COM. 2. COM1--COM8: Relay common interface 3. NC1--NC8: Relay normal close, short connected with COM before pulling in and suspended after pulling in. High and low-level trigger option:

1. S1-S8 is the high-level trigger selection of relay 1 Channel - 8 Channel. 2. When COM is short connected with LOW, the corresponding relay is a LOW-level trigger, while when COM is short connected with high end is a high-level trigger.Package Included: 1 x 8 Channel 12V Relay Module

More in Raspberry Pi Boards

You might also need