About this product
1.5m Micro HDMI to HDMI Cable
Connect a device with a micro HDMI video output to a monitor or television with a standard HDMI input. This black 1.5 metre cable has a male plug at each end, so it runs directly between the two sockets without a separate connector adapter.
The micro HDMI connection is the type used for display output on Raspberry Pi 4B. It is smaller than a standard HDMI plug and is not the same as mini HDMI, micro USB or USB-C. Check the actual socket on any other board, camera or device before ordering.
Key details
Connector 1: micro HDMI male.
Connector 2: standard HDMI male.
Cable length: 1.5 metres.
Colour: black.
Direct display connection for Raspberry Pi 4B and devices with a compatible micro HDMI video output.
Connection and first use
With the equipment powered off, align the micro HDMI plug with the source device and connect the standard HDMI plug to the screen. Avoid forcing the smaller connector or bending the cable sharply at either end. Select the connected HDMI input on the monitor or TV, then power the source device using its separate power supply.
If there is no picture, check both plugs, the selected display input and the video settings on the source. Start with a video mode supported by both the source and display. The available resolution, refresh rate and audio behaviour depend on the complete setup; no specific 4K mode or refresh-rate guarantee is made for this generic cable.
Before ordering
This is a display cable, not a USB video converter, USB charging lead or power supply. A phone with only a USB-C or micro USB socket cannot connect directly to it. Devices with mini HDMI or full-size HDMI outputs need a different connector arrangement.
Package contents
1 x black 1.5m micro HDMI to standard HDMI cable. Raspberry Pi board, display and power supply are not included. SKU: RS6363.