1.5m Micro HDMI to HDMI Cable, Black, for Raspberry Pi 4B - RS6363
1.5m Micro HDMI to HDMI Cable Connect a device with a micro HDMI video output to a monitor or television with a standard HDMI input.
₹208.50 GST added at checkout
SKU RS7105
The Compute Module 3 contains the guts of a Raspberry Pi 3 (the BCM2837 processor and 1GB RAM) as well as an optional 4GB eMMC Flash device (which is the equivalent of the SD card
₹4468.50
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Description:
The Compute Module 3 contains the guts of a Raspberry Pi 3 (the BCM2837 processor and 1GB RAM) as well as an optional 4GB eMMC Flash device (which is the equivalent of the SD card in the Pi). The Pi 3 has a processor speed of 1.2GHz and runs at roughly 10 times the speed of the Pi 1 due to its quad-core CPU.
This is all integrated onto a small 67.6mm x 31mm board which fits into a standard DDR2 SODIMM connector (the same type of connector as used for laptop memory). The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins.
Specifications:
Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.2GHz
1GB LPDDR2 SDRAM
8GB eMMC Flash Memory
Operating Supply Voltage: 1.8V, 3.3V
Minimum Operating Temperature: -25C
Maximum Operating Temperature: +80C
HDMI, MIPI, USB, and GPIO interfaces on edge connector
Pin Description:
Package Included:
1 x Raspberry Pi Compute Module 3
| Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.2GHz | |
| 1GB LPDDR2 SDRAM | |
| 8GB eMMC Flash Memory | |
| Operating Supply Voltage | 1.8V, 3.3V |
| Minimum Operating Temperature | -25C |
| Maximum Operating Temperature | +80C |
| HDMI, MIPI, USB, and GPIO interfaces on edge connector |
More in Raspberry Pi Boards
1.5m Micro HDMI to HDMI Cable Connect a device with a micro HDMI video output to a monitor or television with a standard HDMI input.
₹208.50 GST added at checkout
This thickened thermal conductive silica gel pad is designed to facilitate efficient heat dissipation between integrated circuits (ICs) and heatsinks.
₹52.50 GST added at checkout
The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. Each channel of the module can be set up by a high jumper or low-level trigger.
₹547.50 GST added at checkout
Out of stock
1 x 2.4 GHz Wireless USB Controller Compatible with NES/SNES Super Nintendo Classic Games
₹1498.50 GST added at checkout
Check availability