1.5m Micro HDMI to HDMI Cable, Black, for Raspberry Pi 4B - RS6363
1.5m Micro HDMI to HDMI Cable Connect a device with a micro HDMI video output to a monitor or television with a standard HDMI input.
₹208.50 GST added at checkout
SKU RS1016
As everyone at some point will recognize the Raspberry Pi doesn't include any kind of shutdown button. So the only way to power it off is by unplugging it from the power supply.
₹1498.50
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Description:
As everyone at some point will recognize the Raspberry Pi doesn't include any kind of shutdown button. So the only way to power it off is by unplugging it from the power supply. To make sure you get no corruption of your data files on the SD card you should shut down the Raspberry before powering it off.
So the whole procedure can be a bit annoying especially if you want to use the Raspberry as some kind of embedded PC. e.g. a media server or an internet radio.
Features:
Sending a shutdown signal to the Raspberry if the Shutdown Button is pressed
Powering off the Raspberry after save shutdown
Powering on the Raspberry after the Button is pressed again
LED light indicating the current state: On / Shutdown / Off
Easy to setup
Dimension: 65mm x 30 mm x 20mm
Parameters:
Function BCM RPi
Disk Status 21 Pin 40
Shut Down 24 Pin 18
PWR Status 26 Pin 37
GND N/A Pin 6/9/14/20/25/30/34/39
5V 5V Pin 2/4
Note: The Raspberry Pi main board, connecting cable and battery are not included.
Package Included:
1 x Power Button Module
1 x IR Remote Control
Sending a shutdown signal to the Raspberry if the Shutdown Button is pressed
Powering off the Raspberry after save shutdown
Powering on the Raspberry after the Button is pressed again
LED light indicating the current state: On / Shutdown / Off
Easy to setup
Dimension: 65mm x 30 mm x 20mm
| Function | |
| BCM | |
| RPi | |
| Disk Status | |
| 21 | |
| Pin 40 | |
| Shut Down | |
| 24 | |
| Pin 18 | |
| PWR Status | |
| 26 | |
| Pin 37 | |
| GND | |
| N/A | |
| Pin 6/9/14/20/25/30/34/39 | |
| 5V | |
| 5V | |
| Pin 2/4 | |
| Note | The Raspberry Pi main board, connecting cable and battery are not included. |
More in Raspberry Pi Boards
1.5m Micro HDMI to HDMI Cable Connect a device with a micro HDMI video output to a monitor or television with a standard HDMI input.
₹208.50 GST added at checkout
This thickened thermal conductive silica gel pad is designed to facilitate efficient heat dissipation between integrated circuits (ICs) and heatsinks.
₹52.50 GST added at checkout
The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. Each channel of the module can be set up by a high jumper or low-level trigger.
₹547.50 GST added at checkout
Out of stock
1 x 2.4 GHz Wireless USB Controller Compatible with NES/SNES Super Nintendo Classic Games
₹1498.50 GST added at checkout
Check availability