1.5m Micro HDMI to HDMI Cable, Black, for Raspberry Pi 4B - RS6363
1.5m Micro HDMI to HDMI Cable Connect a device with a micro HDMI video output to a monitor or television with a standard HDMI input.
₹208.50 GST added at checkout
SKU RS2405
4.2-inch e-Ink Paper Display Module with SPI Interface is an E-Ink display module, 2.9inch, 296×128 resolution, with an embedded controller, communicating via SPI interface
₹4912.50
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Operating Voltage: 3.3V DC
Display Size: 4.2 inch
Outline Dimension: 90.1 × 77 × 1.18
Dot Pitch: 0.212 × 0.212
Grey Level: 2
Description: 4.2-inch e-Ink Paper Display Module with SPI Interface is an E-Ink display module, 2.9inch, 296×128 resolution, with an embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra-low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. There is no backlight so it can keep displaying last content for a long time even when the power is down. As these displays have no backlight panels and it doesn’t need a continuous power supply to display the (static data with periodic intervals) data on the screen, it has a great advantage of ultra-low power consumption. Also, it has a wide viewing angle, great viewing effect under sunlight, Basically power to the display is only required for refreshing. For connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.. SPI interface can be used. Specification:
Operating Voltage 3.3V DC
Outline Dimension 90.1 × 77 × 1.18
Dot Pitch 0.212 × 0.212
Grey Level 2
Display Color Black And White
Display Resolution 400×300
Viewing Angle >170°
Interface 3-wire SPI, 4-wire SPI
Full Refresh Time 4s
Refresh Power 26.4mW(typ.)
Standby Power <0.017mW
Features:
No backlight keeps displaying last content for a long time even when a power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
Interface:
VCC:3.3V/5V
GND:Ground
DIN:SPI MOSI pin
CLK:SPI SCK pin
CS:SPI chip selection, low active
DC:Data/Command selection (high for data, low for command)
RST:External reset, low active
BUSY:Busy status output, high active
Package Included:
1 x 4.2-inch e-Ink Paper Display Module with SPI Interface
1 x Interfacing Cable
No backlight keeps displaying last content for a long time even when a power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
| Operating Voltage | |
| 3.3V DC | |
| Outline Dimension | |
| 90.1 × 77 × 1.18 | |
| Dot Pitch | |
| 0.212 × 0.212 | |
| Grey Level | |
| 2 | |
| Display Color | |
| Black And White | |
| Display Resolution | |
| 400×300 | |
| Viewing Angle | |
| >170° | |
| Interface | |
| 3-wire SPI, 4-wire SPI | |
| Full Refresh Time | |
| 4s | |
| Refresh Power | |
| 26.4mW(typ.) | |
| Standby Power | |
| <0.017mW |
More in Raspberry Pi Boards
1.5m Micro HDMI to HDMI Cable Connect a device with a micro HDMI video output to a monitor or television with a standard HDMI input.
₹208.50 GST added at checkout
This thickened thermal conductive silica gel pad is designed to facilitate efficient heat dissipation between integrated circuits (ICs) and heatsinks.
₹52.50 GST added at checkout
The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. Each channel of the module can be set up by a high jumper or low-level trigger.
₹547.50 GST added at checkout
Out of stock
1 x 2.4 GHz Wireless USB Controller Compatible with NES/SNES Super Nintendo Classic Games
₹1498.50 GST added at checkout
Check availability