Waveshare

Waveshare CP2102 USB UART Board USB to TTL Serial Adapter With Type A Connector USB UART Converter for Embedded Systems - NA152

SKU NA152

The CP2102 USB UART Board (type A) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard.

₹682.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

The CP2102 USB UART Board (type A) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard.

Features:

Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/10/11...

Voltage output support: 5V or 3.3V

Integrated USB protection device: SP0503

3 LEDs: TXD LED, RXD LED, POWER LED

Pins accessible on pinheaders: TXD, RXD, RTS, CTS

Other pins are accessible on drilled holes, easily connected to the user application system (separate pin headers are provided)

CP2102 features:

Single-Chip USB to UART Data Transfer

No external resistors required, no external crystal required

On-chip power-on reset circuit and voltage regulator

Integrated 1024-Byte EEPROM

USB Function Controller

USB Specification 2.0 compliant; full-speed (12 Mbps)

USB suspend states supported via SUSPEND pins

UART

All handshaking and modem interface signals

Data formats supported:

Data bits: 5, 6, 7, and 8

Stop bits: 1, 1.5, and 2

Parity: odd, even, no parity

Baud rates: 300 bps to 1 Mbps

576 Byte receive buffer; 640 byte transmit buffer

Hardware or X-On/X-Off handshaking supported

Event character support

Virtual COM Port Device Drivers

Windows 8/7/Vista/Server 2003/XP/2000

MAC OS-X/OS-9

Linux 2.40 or higher

USBXpress Direct Driver Support

Windows 7/Vista/Server 2003/XP/2000

Windows CE

Temperature Range

–40 to +85 °C)

How to Use:

In the case of working with an MCU:

VCCIO: 3.3V or 5V output (the module is powered from USB, the onboard jumper should be shorted to 3.3V or 5V)

GND: connects to GND

TXD: connects to the MCU.RX (signal direction: MCU. RX CP2102 PC.TX)

RXD: connects to the  MCU.TX (signal direction: MCU.TX CP2102 PC.RX)

RTS: connects to the MCU.CTS (signal direction: MCU.CTS CP2102 PC.RTS)

CTS: connects to the MCU.RTS (signal direction: MCU.RTS CP2102 PC.CTS)

Useful Link:

Waveshare CP2102 USB UART Board

Note: VCP examples and USBXpress driver program library are provided.

Package Included:

1 x Waveshare CP2102 USB UART Board (type A)

Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/10/11...

Voltage output support: 5V or 3.3V

Integrated USB protection device: SP0503

3 LEDs: TXD LED, RXD LED, POWER LED

Pins accessible on pinheaders: TXD, RXD, RTS, CTS

Other pins are accessible on drilled holes, easily connected to the user application system (separate pin headers are provided)

More in USB & UART Interfaces

You might also need