About this product
Description :
The CP2102 USB UART Board (Micro) provides robust USB to UART data transfer using the integrated CP2102 chip. Benefit from its single-chip design (no external resistors or crystal needed), on-chip power-on reset, and voltage regulator. It supports USB suspend states and offers all essential UART handshaking and modem signals, making it ideal for embedded development.
Looking for the same functionality with a different interface?
CP2102 USB UART Board (Type A)
CP2102 USB UART Board (Mini-USB)
CP2102 USB UART Board (Type C)
Specifications :
Operating Voltage (VDC) : 3.3 ~ 5
Integrated USB protection device : SP0503
UART Baudrate : 300 bps to 1 Mbits
Features:
Single-Chip USB to UART Data Transfer.
Integrated 1024-Byte EEPROM.
USB Specification 2.0 compliant; full-speed (12 Mbps).
USB suspend states supported via SUSPEND pins.
All handshaking and modem interface signals.
576 Byte receive buffer; 640 bytes transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Virtual COM Port Device Drivers.
USB Xpress Direct Driver Support.
Other pins are accessible on drilled holes, easily connected to the user application system (separate pin headers are provided)
Pin connections of FT232 USB UART Board:
VCCIO 3.3V or 5V output (the module is powered from USB, the onboard jumper should be shorted to 3.3V or 5V)
GND GND
TXD MCU.RX (signal direction: MCU.RX << FT232 << PC.TX)
RXD MCU.TX (signal direction: MCU.TX >> FT232 >> PC.RX)
RTS MCU.CTS (signal direction: MCU.CTS << FT232 << PC.RTS)
CTS MCU.RTS (signal direction: MCU.RTS >> FT232 >> PC.CTS)
This breakout also allows you to connect the TX/RX pins of your favorite microcontroller or serial application to the RX/TX pins of the breakout, creating a simple serial cable replacement.
Package Included:
1 x CP2102 USB UART Board (micro)
2 x 4-pin male pin header 4-pin female pin header
1 x 6-pin custom connector jumper wire
Single-Chip USB to UART Data Transfer.
Integrated 1024-Byte EEPROM.
USB Specification 2.0 compliant; full-speed (12 Mbps).
USB suspend states supported via SUSPEND pins.
All handshaking and modem interface signals.
576 Byte receive buffer; 640 bytes transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Virtual COM Port Device Drivers.
USB Xpress Direct Driver Support.
Other pins are accessible on drilled holes, easily connected to the user application system (separate pin headers are provided)