WaveShare 4.2inch E-Paper E-Ink Display Module (B) for Raspberry Pi Pico, 400×300, Red / Black / White, SPI- RS1961

SKU RS1961

This product is an E-paper device adopting the image display technology of Microencapsulated Electrophoretic Display, MED.

₹3859.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Operating voltage: 3.3V/5V

Display color: red, black, white

Resolution: 400 x 300 pixels

Grey scale: 2

Interface: 3-wire SPI, 4-wire SPI

Viewing angle: >170°

Partial refresh time: N/A

Full refresh time: 15s

Outline dimensions: 93.5 x 78.5mm

Display size: 84.8 x 63.6mm

Refresh power: 26.4mW (typ.)

Standby current: <0.01uA (almost none)

Dot pitch: 0.212 x 0.212mm

Description : This is a 4.2inch e-Paper display module for Raspberry Pi Pico, 400 x 300 pixels, supports red, black, white colors. SPI interface. Features :

No backlight, keeps displaying last content for a long time even when power down.

Ultra-low power consumption, basically power is only required for refreshing.

SPI interface, requires minimal IO pins.

Onboard voltage translator, compatible with 3.3V / 5V MCUs.

2 x user buttons for easy interaction.

Specifications :

Operating voltage: 3.3V/5V

Display color: red, black, white

Resolution: 400 x 300 pixels

Grey scale: 2

Interface: 3-wire SPI, 4-wire SPI

Viewing angle: >170°

Partial refresh time: N/A

Full refresh time: 15s

Outline dimensions: 93.5 x 78.5mm

Display size: 84.8 x 63.6mm

Refresh power: 26.4mW (typ.)

Standby current: <0.01uA (almost none)

Dot pitch: 0.212 x 0.212mm

Working Protocol : This product is an E-paper device adopting the image display technology of Microencapsulated Electrophoretic Display, MED. The initial approach is to create tiny spheres, in which the charged color pigments are suspending in the transparent oil and would move depending on the electronic charge. The E-paper screen displays patterns by reflecting the ambient light, so it has no background light requirement. (Note that the e-Paper cannot support updating directly under sunlight). Hardware connection :

Please take care of the direction when connecting Pico. A logo of the USB port is printed to indicate the directory, you can also check the pins.

If you want to connect the board by an 8-pin cable, you can refer to the table below

e-Paper Pico Description

VCC VSYS Power input

GND GND GND

DIN GP11 MOSI pin of SPI interface, data transmitted from Master to Slave.

CLK GP10 SCK pin of SPI interface, clock input

CS GP9 Chip select pin of SPI interface, Low active

DC GP8 Data/Command control pin (High: Data; Low: Command)

RST GP12 Reset pin, low active

BUSY GP13 Busy pin

KEY0 GP2 User button 0

KEY1 GP3 User button 1

RUN RUN Reset

Package Included : 1 x 4.2inch E-Paper E-Ink Display Module (B)

No backlight, keeps displaying last content for a long time even when power down.

Ultra-low power consumption, basically power is only required for refreshing.

SPI interface, requires minimal IO pins.

Onboard voltage translator, compatible with 3.3V / 5V MCUs.

2 x user buttons for easy interaction.

Specifications

Operating voltage3.3V/5V
Display colorred, black, white
Resolution400 x 300 pixels
Grey scale2
Interface3-wire SPI, 4-wire SPI
Viewing angle>170°
Partial refresh timeN/A
Full refresh time15s
Outline dimensions93.5 x 78.5mm
Display size84.8 x 63.6mm
Refresh power26.4mW (typ.)
Standby current<0.01uA (almost none)
Dot pitch0.212 x 0.212mm

More in E-Paper Displays

You might also need