About this product
Size: 2.9inch
Outline dimensions(raw panel): 79.0mm × 36.7mm × 1.05mm
Outline dimension(driver board): 82.0mm × 38.0mm
Display size: 66.89mm × 29.05mm
Operating voltage: 3.3V/5V
Interface: SPI
Dot pitch: 0.138 × 0.138
Resolution: 296 × 128
Display color: Black, White, Red
Greyscale: 2
full refresh time: 15s
Refresh power: 26.4mW (typ.)
Standby current: <0.01uA (almost none)
Description :
2.9inch EPD (Electronic Paper Display) Module For Raspberry Pi Pico, 296 × 128 Pixels, Black / White / Red, SPI Interface.
Features :
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, requires minimal IO pins
Onboard voltage translator, compatible with 3.3V / 5V MCUs
Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Specification
Size: 2.9inch
Outline dimensions(raw panel): 79.0mm × 36.7mm × 1.05mm
Outline dimension(driver board): 82.0mm × 38.0mm
Display size: 66.89mm × 29.05mm
Operating voltage: 3.3V/5V
Interface: SPI
Dot pitch: 0.138 × 0.138
Resolution: 296 × 128
Display color: Black, White, Red
Greyscale: 2
full refresh time: 15s
Refresh power: 26.4mW (typ.)
Standby current: <0.01uA (almost none)
Note:
1. Refresh time: The refresh time is the experimental results, the actual refresh time will have errors, and the actual effect shall prevail. There will be a flickering effect during the global refresh process, this is a normal phenomenon.
2. Power consumption: The power consumption data is the experimental results. The actual power consumption will have a certain error due to the existence of the driver board and the actual use situation. The actual effect shall prevail.
Package Included :
Pico-ePaper-2.9-B x1
PH2.0 8PIN wire 20cm x1
Standoff pack x1
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, requires minimal IO pins
Onboard voltage translator, compatible with 3.3V / 5V MCUs
Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)