About this product
Operating voltage: 3.3V/5V
Interface: 3-wire SPI, 4-wire SPI
Outline dimensions (Driver board): 74.0mm × 37.5mm
Outline dimensions (raw panel): 71.820mm × 36.304mm × 1.05mm
Display size: 60.088mm × 30.704mm
Dot pitch: 0.202 × 0.203mm
Resolution: 296 × 152 pixels
Display color: Black, white
Grayscale: 2
Partial refresh time: 0.3s
full refresh time: 6s
Refresh power: 26.4mW (typ.)
Standby current: <0.01uA (almost 0)
Viewing Angle: >170°
Description :
2.66inch EPD (Electronic Paper Display) Module For Raspberry Pi Pico, 296 × 152 Pixels, Black / White, SPI Interface.
Features
No backlight keeps displaying last content for a long time even when power down.
Ultra-low power consumption, basically power is only required for refreshing.
SPI interface requires minimal IO pins.
Specification
Operating voltage: 3.3V/5V
Interface: 3-wire SPI, 4-wire SPI
Outline dimensions (Driver board): 74.0mm × 37.5mm
Outline dimensions (raw panel): 71.820mm × 36.304mm × 1.05mm
Display size: 60.088mm × 30.704mm
Dot pitch: 0.202 × 0.203mm
Resolution: 296 × 152 pixels
Display color: Black, white
Grayscale: 2
Partial refresh time: 0.3s
full refresh time: 6s
Refresh power: 26.4mW (typ.)
Standby current: <0.01uA (almost 0)
Viewing Angle: >170°
Package Included :
Pico-ePaper-2.66 x1
Standoff pack x1
No backlight keeps displaying last content for a long time even when power down.
Ultra-low power consumption, basically power is only required for refreshing.
SPI interface requires minimal IO pins.