About this product
Driver Chip : SSD1306
Interface : 3-wire SPI, 4-wire SPI, I2C
Resolution : 128 x 64
Display Size : 2.44 cm (0.96 Inch)
Colors : 1/4 yellow section, 3/4 blue section
Visible Angle : >160
Operating Temperature(°C) : -20~70
Storage Temperature(°C) : -30~80
Operating Voltage : 3.3V / 5V
Description :
This is a Waveshare 2.44 cm (0.96 Inch) OLED Display (B) module. It is a very high-contrast display with no backlight. It is perfect when you need an ultra-small display. This module supports SPI/I2C communication interfaces. It supports various hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32.
Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. This module provides 3 kinds of driver interfaces; they are 3-wire SPI, 4-wire SPI, and I2C interface.
Pin Definition:
VCC Power positive (3.3~5V power input)
GND Ground
NC NC
DIN Data input
CLK Clock signal input
CS Chip selection, low active
D/C Command signal, low level for command, high level for data
RES Reset signal, low active
Features:
Better quality
The IIC address can be changed, it is convenient to use with different machines.
Four square holes are easy to install
Specifications:
Driver Chip : SSD1306
Interface : 3-wire SPI, 4-wire SPI, I2C
Resolution : 128 x 64
Display Size : 2.44 cm (0.96 Inch)
Colors : 1/4 yellow section, 3/4 blue section
Visible Angle : >160
Operating Temperature(°C) : -20~70
Storage Temperature(°C) : -30~80
Operating Voltage : 3.3V / 5V
Package Included:
1 x 2.44 cm (0.96 Inch) OLED Display (B)
Better quality
The IIC address can be changed, it is convenient to use with different machines.
Four square holes are easy to install