0.91-inch Blue OLED Display SSD1306 128x32 I2C Module - RS1898

SKU RS1898

Add a compact text and graphics screen to an Arduino, ESP32 or Raspberry Pi project. This monochrome OLED uses a 128 x 32 pixel panel and an SSD1306 controller.

₹300.00

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

0.91-inch SSD1306 Blue OLED Display - 128x32 I2C

Add a compact text and graphics screen to an Arduino, ESP32 or Raspberry Pi project. This monochrome OLED uses a 128 x 32 pixel panel and an SSD1306 controller. Blue pixels light up against a dark background without a separate backlight, making it useful for sensor readings, menu items and short status messages.

Key features

0.91-inch monochrome display with blue pixels.

128 x 32 pixel resolution for text, icons and simple graphics.

I2C interface uses SDA and SCL, leaving more controller pins free.

Four-pin connection: GND, VCC, SCL and SDA. Check the printed order on your board before wiring.

SSD1306 controller supported by common Arduino and MicroPython display libraries.

Specifications

Display size 0.91 inch diagonal

Resolution 128 x 32 pixels

Pixel colour Blue

Driver SSD1306

Interface I2C / IIC, four-pin module

Module supply 3.3V to 5V DC

Backlight Not required; self-emitting OLED pixels

Connection and setup

Connect GND to ground, VCC to a suitable supply, SCL to the controller's I2C clock and SDA to its I2C data pin. On an Arduino Uno R3, these signals are A5/SCL and A4/SDA. For Raspberry Pi or another 3.3V controller, use 3.3V power and logic unless you have verified the module's pull-up arrangement.

Run an I2C scanner to find the display address, then configure your SSD1306 library for a 128 x 32 screen. A 128 x 64 example will not match this panel. Disconnect power before changing wires and avoid pressing on the glass display.

Typical uses

Temperature, voltage and other sensor readouts.

Compact IoT status displays and instrument panels.

Project menus, counters and small battery-powered interfaces.

Package contents 1 x 0.91-inch 128x32 blue SSD1306 I2C OLED display module. Controller boards, jumper wires and other demonstration accessories are not included.

0.91-inch monochrome display with blue pixels.

128 x 32 pixel resolution for text, icons and simple graphics.

I2C interface uses SDA and SCL, leaving more controller pins free.

Four-pin connection: GND, VCC, SCL and SDA. Check the printed order on your board before wiring.

SSD1306 controller supported by common Arduino and MicroPython display libraries.

Specifications

Display size
0.91 inch diagonal
Resolution
128 x 32 pixels
Pixel colour
Blue
Driver
SSD1306
Interface
I2C / IIC, four-pin module
Module supply
3.3V to 5V DC
Backlight
Not required; self-emitting OLED pixels

More in OLED Displays

You might also need