About this product
Operating voltage: 3.3V/5V(Please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly)
Support interface: 4-wire SPI, 3-wire SPI
Controller: SSD1351
Resolution: 128(H)RGB x 128(V)
Dimension: 26.855(H)x 26.855(V)mm
Pixel size: 0.045(H) x 0.194(V) mm
Display color: 65K color
Description :
1.5inch RGB OLED Module provides Raspberry Pi, STM32, and Arduino demos.
Specification
Operating voltage: 3.3V/5V(Please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly)
Support interface: 4-wire SPI, 3-wire SPI
Controller: SSD1351
Resolution: 128(H)RGB x 128(V)
Dimension: 26.855(H)x 26.855(V)mm
Pixel size: 0.045(H) x 0.194(V) mm
Display color: 65K color
Features :
128×128 resolution OLED display, 65K RGB colors, clear and colorful displaying effect
SPI interface, minimizes required IO pins
Comes with development resources (examples for Raspberry Pi/Arduino/STM32)
Pinout :
PIN
Description
VCC
3.3V/5V Power input
GND
Ground
DIN
Data input
SCL
Clock input
CS
Chip select, active low
DC
Data/command signal selection, low level indicates command, high level indicates data
RST
Reset signal, active low
Package Included :
1.5inch RGB OLED Module x1
PH2.0 7PIN cable x1
128×128 resolution OLED display, 65K RGB colors, clear and colorful displaying effect
SPI interface, minimizes required IO pins
Comes with development resources (examples for Raspberry Pi/Arduino/STM32)