Waveshare 1.51inch Transparent OLED, 128×64 Resolution, SPI/I2C Interfaces, light blue color display - RS1962

SKU RS1962

The integrated built-in controller used by this OLED is SSD1309, which has 128 × 64 bits SRAM, supports up to 128 × 64 pixel screen, supports SPI/I2C/ 6800 parallel port/8080

₹2473.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description :

1.51inch Transparent OLED, 128×64 Resolution, SPI/I2C Interfaces, Light Blue Color Display

Specification :

Working Voltage: 5V/3.3V

Communication Interface: SPI/I2C

Controller: SSD1309

Resolution: 128 × 64

Display Size: 35.05 × 15.32 (mm)

Pixel Size: 0.254 × 0.254 (mm)

Board Size: 41 × 22.5 (mm)

Display Color: Light Blue

OLED & Controller

The integrated built-in controller used by this OLED is SSD1309, which has 128 × 64 bits SRAM, supports up to 128 × 64 pixel screen, supports SPI/I2C/ 6800 parallel port/8080 parallel port, 256-level brightness settings, this screen is 128 × 64 pixels, so the internal SRAM is not fully used. This module adopts four-wire SPI and IIC interfaces, with good compatibility and high transmission speed.

Install Libraries

Install BCM2835 libraries

wget http://www.airspayce.com/mikem/bcm2835/bcm2835-1.71.tar.gz tar zxvf bcm2835-1.71.tar.gz cd bcm2835-1.71/ sudo ./configure && sudo make && sudo make check && sudo make install #For more details, please refer to http://www.airspayce.com/mikem/bcm2835/

Install wiringPi libraries

#Open the Raspberry Pi terminal and run the following command sudo apt-get install wiringpi #For Raspberry Pi systems after May 2019 (earlier than before, you may not need to execute), you may need to upgrade: wget https://project-downloads.drogon.net/wiringpi-latest.deb sudo dpkg -i wiringpi-latest.deb gpio -v # Run gpio -v and version 2.52 will appear. If it does not appear, it means that there is an installation error

#Bullseye branch system use the following command: git clone https://github.com/WiringPi/WiringPi cd WiringPi ./build gpio -v # Run gpio -v and version 2.60 will appear. If it does not appear, it means that there is an installation error

Install Python libraries

#python2 sudo apt-get update sudo apt-get install python-pip sudo apt-get install python-pil sudo apt-get install python-numpy sudo pip install RPi.GPIO sudo pip install spidev #python3 sudo apt-get update sudo apt-get install python3-pip sudo apt-get install python3-pil sudo apt-get install python3-numpy sudo pip3 install RPi.GPIO sudo pip3 install spidev Package Included:

1.51inch Transparent OLED x1

PH2.0 7PIN cable x1

Screws pack

Specifications

Working Voltage5V/3.3V
Communication InterfaceSPI/I2C
ControllerSSD1309
Resolution128 × 64
Display Size35.05 × 15.32 (mm)
Pixel Size0.254 × 0.254 (mm)
Board Size41 × 22.5 (mm)
Display ColorLight Blue

More in OLED Displays

You might also need