Waveshare 0.96inch OLED (A) -RS1702

SKU RS1702

Hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32 Hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32 Command signal, low level for command, high

₹934.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

DRIVER CHIP 1306

INTERFACE 3-wire SPI, 4-wire SPI, I2C

RESOLUTION 128*64

DISPLAY SIZE 0.96inch

COLORS 1/4 yellow section, 3/4 blue section

VISIBLE ANGLE >160°

OPERATING TEMP. (℃) -20~70

STORAGE TEMP. (℃) -30~80

OPERATING VOLTAGE 3.3V / 5V

APPLICABILITY Hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32

Description : 0.96inch OLED, SPI/I2C Interfaces, Angled/Horizontal Pinheader Key Parameters

DRIVER CHIP 1306

INTERFACE 3-wire SPI, 4-wire SPI, I2C

RESOLUTION 128*64

DISPLAY SIZE 0.96inch

COLORS 1/4 yellow section, 3/4 blue section

VISIBLE ANGLE >160°

OPERATING TEMP. (℃) -20~70

STORAGE TEMP. (℃) -30~80

OPERATING VOLTAGE 3.3V / 5V

APPLICABILITY Hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32

Interface

PIN NO. SYMBOL DESCRIPTION

1 VCC Power positive (3.3~5V power input)

2 GND Ground

3 NC NC

4 DIN Data input

5 CLK Clock signal input

6 CS Chip selection, low active

7 D/C Command signal, low level for command, high level for data

8 RES Reset signal, low active

Hardware Config

MODE/INTERFACE BS0/BS1 DIN SCK

3-wire SPI 1/0 MOSI SCLK

4-wire SPI 0/0

I2C 0/1 SDA SCL

Ordering Info The 0.96inch OLED provides 2 options for the onboard pinheader:

0.96inch OLED (A): angled/horizontal pinheader

0.96inch OLED (B): straight/vertical pinheader

Package Included : 0.96inch OLED (A) x 1

More in OLED Displays

You might also need