Radiomaster

RadioMaster RP4TD ELRS 2.4GHz Nano Receiver ExpressLRS Dual Antenna FPV Receiver - RS7715

SKU RS7715

The RadioMaster RP4TD ELRS 2.4GHz Nano Receiver features dual-channel 2.4GHz radios, the RP4TD excels in signal sensitivity, signal-to-noise ratio, and overall performance due to

₹5497.70

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

The RadioMaster RP4TD ELRS 2.4GHz Nano Receiver features dual-channel 2.4GHz radios, the RP4TD excels in signal sensitivity, signal-to-noise ratio, and overall performance due to its optimized circuit design. The reliable DCDC power supply circuit ensures lower operating temperatures during extended usage. Additionally, the dual TCXO contributes to the utmost frequency stability and makes the RP4TD a leader in its class. The RP4TD features built in WIFI so you can wirelessly upgrade firmware to configure the receiver via the built-in WebUI with your PC or mobile phone.

Specifications:

Type: ISM

MCU: ESP32

RF Chip: SX1281 x 2

Antenna: 65mm 2.4 GHz T Antenna x 2

Frequency Range: 2.4 GHz

Maximum Refresh Rate: Hz / 1000 Hz

Telemetry RF Power: Max 2 x 100 mW

Working Voltage: DC 4.5-12.0V

Weight: 1.4g (without antenna)

Dimension: 23.7*16.3*4.0mm

Firmware Version: ExpressLRS V3.3.0 pre-installed

FW Target: RadioMaster RP4TD 2400 RX

Bus interface: CRSF

Extend interface: UART

Features:

Gemini mode compatible

Reliable DCDC Power supply circuit

Class-leading SNR and RSSI performance

Optimized PCB design for better heat dissipation

Upgraded antenna with greater durability and performance

UART pads for extended applications

Dual TCXO (temperature-compensated crystal oscillator)

2x 100 mW RF Telemetry power output

Compatible with all 2.4 GHz ExpressLRS modules and transmitters with built-in 2.4GHz ExpressLRS.

High Refresh Rate: Supports up to 500 Hz / 1000 Hz refresh rate for ultra-low latency RC control.

True Diversity Dual-Antenna Design: 2 × 65 mm 2.4GHz T-antennas for improved reception and performance.

Useful Link:

User Manual

Package Included:

1 x RP4TD ExpressLRS 2.4GHz Diversity Receiver

1 x CRSF wire

3 x Heat-shrinkable tubes

2 x 65mm 2.4GHz T Antenna (Installed on receiver)

1 x User Manual

Gemini mode compatible

Reliable DCDC Power supply circuit

Class-leading SNR and RSSI performance

Optimized PCB design for better heat dissipation

Upgraded antenna with greater durability and performance

UART pads for extended applications

Dual TCXO (temperature-compensated crystal oscillator)

2x 100 mW RF Telemetry power output

Compatible with all 2.4 GHz ExpressLRS modules and transmitters with built-in 2.4GHz ExpressLRS.

High Refresh Rate: Supports up to 500 Hz / 1000 Hz refresh rate for ultra-low latency RC control.

True Diversity Dual-Antenna Design: 2 × 65 mm 2.4GHz T-antennas for improved reception and performance.

Specifications

TypeISM
MCUESP32
RF ChipSX1281 x 2
Antenna65mm 2.4 GHz T Antenna x 2
Frequency Range2.4 GHz
Maximum Refresh RateHz / 1000 Hz
Telemetry RF PowerMax 2 x 100 mW
Working VoltageDC 4.5-12.0V
Weight1.4g (without antenna)
Dimension23.7*16.3*4.0mm
Firmware VersionExpressLRS V3.3.0 pre-installed
FW TargetRadioMaster RP4TD 2400 RX
Bus interfaceCRSF
Extend interfaceUART

More in Transmitters & Receivers

You might also need