About this product
Description:
The Nexus-XR revolutionizes helicopter flight controllers by integrating a cutting-edge ExpressLRS receiver with dual Semtech SX1281 2.4GHz transceivers. This built-in receiver delivers exceptional RF performance, superior range, reliability, and effortless setup. It eliminates the need for external receivers, simplifying installation and reducing weight.
At the core of the Nexus-XR is the powerful STM32F722 MCU, paired with the ICM42688P 6-axis MEMS motion-tracking device. This device provides excellent vibration resistance and enhanced signal rejection, making it ideal for electric and nitro helicopters.
The Nexus-XR features several key upgrades. An improved BEC delivers more stable power to electronics, enhancing reliability, while the external voltage input now supports a range of 3.6V to 70V. Memory has been upgraded to 256MB, enabling longer flight logs. The CNC-machined aluminum case is sleeker yet still serves as a protective shield and heat sink, keeping the system cool during intense flights.
Designed for ultimate convenience, the Nexus-XR’s compact, rugged build fits a wide range of helicopter sizes and delivers top performance in demanding conditions.
Specifications:
Firmware: Rotorflight 2.2
MCU: STM32F722RET6
Gyro (IMU): ICM42688P
Flash Memory (Black Box. IC): 256MB (W25N02KVZEIR)
Barometer: SPL06-001
Uart: 5 - S.BUS[UART1], TELEM[UART2], PORT-A[UART4], PORT-B[UART6], PORT-C[UART3]
Servo: S1, S2, S3, TAIL Servos (Up to 12V )
RPM Sensor: 1 - FROM ESC FREQUENCY SENSOR
AUX: 1
Ext voltage input (tele): 3.6-70V
Receiver Support: CRSF, ELRS, GHOST, S.BUS, SUMD, IBUS, XBUS, EXBUS, PPM, MSP
Voltage Supply(DC): 5 - 16V
A-B-C Serial Port Power Output: 5V - 1.5A
Telemetry: S.BUS, HoTT, S.Port, MSP, EDGETX, ELRS
ESC: PWM, Oneshot, Multishot, Dshot
Support Tail ESC: 760μs / 1520μs Servo
Support Tail Motor: Yes
Internal Receiver: RP4TD-M ExpressLRS 2.4GHz Mini True Diversity Receiver
MCU: ESP32
Type: ISM
RF Chip: SX1281 x 2
Antenna: 65mm 2.4GHz Wire Antenna x 2
Frequency Range: 2.4GHz
Maximum Refresh Rate: 500Hz / F1000Hz
Telemetry RF Power: Max 2 x 10mW
Wifi Updates: Yes
FW Target: RadioMaster RP4TD-M 2400 RX
Bus interface: CRSF
Features:
Dual Semtech SX1281 2.4GHz transceivers for seamless RF performance, eliminating the need for an external receiver.
STM32F722 MCU and ICM42688P 6-axis gyroscope/accelerometer for superior flight dynamics.
Two 65mm wire antennae for superior signal strength and range.
Additional pins for expanded control in complex setups.
Compatible with 760μs/1520μs tail servos and ESCs.
Supports 3.6V–70V external power input for flexible setups.
Dedicated 1.8V (gyro), 3.3V (MCU), and 5V (interfaces) to minimize noise.
Ideal for any helicopter builds.
Engineered for peak performance and compatibility.
256MB onboard flash memory for detailed logging and tuning.
Multiple UART ports support CRSF, ELRS, S.BUS, and more.
Sleek, rugged design doubles as a heat sink to keep the system cool.
Capable of supporting 12-volt servos.
Stable, reliable power delivery to electronics for enhanced performance.
Lightweight, flexible USB-C extender cable for easy access in tight builds.
Standard feature for enhanced safety in emergencies.
Grey / Gold / Red / Blue / Purple.
Overview:
User Manual:
NEXUS-XR User Manual
Package Included:
1 x NEXUS-XR Helicopter Flight Controller
3 x JST-GH 4 Wire pigtail cables
1 x JST-GH to Servo Plug (Dupont 3-pin connector)
1 x Ultra-lightweight and flexible USB-C extender
1 x Type C extension cable
1 x JST-ZH1.5 "DSM" Telemetry cable (Telemetry only does not support DSM Receivers)
1 x Voltage telemetry wire
3 x 3M double-sided mounting tape
2 x Heat shrink tubing
1 x Inventory Card
Dual Semtech SX1281 2.4GHz transceivers for seamless RF performance, eliminating the need for an external receiver.
STM32F722 MCU and ICM42688P 6-axis gyroscope/accelerometer for superior flight dynamics.
Two 65mm wire antennae for superior signal strength and range.
Additional pins for expanded control in complex setups.
Compatible with 760μs/1520μs tail servos and ESCs.
Supports 3.6V–70V external power input for flexible setups.
Dedicated 1.8V (gyro), 3.3V (MCU), and 5V (interfaces) to minimize noise.
Ideal for any helicopter builds.
Engineered for peak performance and compatibility.
256MB onboard flash memory for detailed logging and tuning.
Multiple UART ports support CRSF, ELRS, S.BUS, and more.
Sleek, rugged design doubles as a heat sink to keep the system cool.
Capable of supporting 12-volt servos.
Stable, reliable power delivery to electronics for enhanced performance.
Lightweight, flexible USB-C extender cable for easy access in tight builds.
Standard feature for enhanced safety in emergencies.
Grey / Gold / Red / Blue / Purple.