MQ7 CO Carbon Monoxide Coal Gas Sensor Module -SR044

SKU SR044

This Carbon Monoxide (CO) gas sensor detects the concentrations of CO in the air and outputs its reading as an analogue voltage.

₹142.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Operating Voltage: DC 5V

Range: 10~1000 ppm

Characteristic Gas: 100 ppm Co

Sensitivity: ≥ 3%.

Description: This Carbon Monoxide (CO) gas sensor detects the concentrations of CO in the air and outputs its reading as an analogue voltage. The sensor can measure concentrations of 10 to 10,000 ppm. The sensor can operate at temperatures from -10 to 50°C and consumes less than 150 mA at 5 V. This module provides both digital and analogue outputs. The threshold level for digital output can be easily adjusted using the preset on the board. The MQ-7 sensor module can be easily interfaced with microcontrollers, Arduino and etc. Specification:

Operating Voltage DC 5V

Range 10 ~ 1000 ppm

Characteristic Gas 100 ppm CO

Sensitivity ≥ 3%.

Return Time ≤ 30 sec

Heating Resistance ± 31 Ω

Heating Current ≤ 180 mA

Heating Voltage 5.0V ± 2V / 1.5 ± 1V

Heating Power approx. 350 mW

Ambient Temperature -20 ~ + 50°C

Humidity ≤ 95% RH

Oxygen Content 21%.

Features:

The analogue output voltage, the higher the concentration the higher the voltage.

The carbon monoxide detection with better sensitivity.

There are four screw holes for easy positioning.

With a long service life and reliable stability.

Rapid response and recovery characteristics.

Pin Definition:

Output

GND

VCC

Package Included: 1 x MQ7 CO Carbon Monoxide Coal Gas Sensor Module

The analogue output voltage, the higher the concentration the higher the voltage.

The carbon monoxide detection with better sensitivity.

There are four screw holes for easy positioning.

With a long service life and reliable stability.

Rapid response and recovery characteristics.

Specifications

Operating Voltage
DC 5V
Range
10 ~ 1000 ppm
Characteristic Gas
100 ppm CO
Sensitivity
≥ 3%.
Return Time
≤ 30 sec
Heating Resistance
± 31 Ω
Heating Current
≤ 180 mA
Heating Voltage
5.0V ± 2V / 1.5 ± 1V
Heating Power
approx. 350 mW
Ambient Temperature
-20 ~ + 50°C
Humidity
≤ 95% RH
Oxygen Content
21%.

More in Gas & Flame Sensors

You might also need