About this product
The 7Semi SCD43 CO₂, Temperature and Humidity Sensor Breakout is a compact sensor module for accurate indoor air-quality monitoring. It uses Sensirion’s PASens photoacoustic NDIR technology to directly measure CO2 levels from 0ppm to 40,000 ppm, with an accuracy of +/-(30 ppm + 3% of the reading). It also measures temperature and relative humidity, making it ideal for HVAC systems, smart buildings, indoor air-quality monitors and IoT applications.
Important power note: When powering the board through VCC, the 3V3 pin acts as the regulated 3.3V output with 200mA current rating . Alternatively, the board can be powered directly through the 3V3 pin. Do not apply power to both VCC and 3V3 at the same time.
Key Features
Measures CO2, temperature and relative humidity
CO₂ measurement range: 0ppm to 40,000ppm
CO₂ accuracy: +/-(30 ppm + 3% of measured value)
PASens photoacoustic NDIR technology for true CO2 measurement
Supports automatic self-calibration (ASC)
Supports forced recalibration (FRC)
Supports single-shot measurement
Easy integration through I2C interface
Compact breakout board for embedded and IoT applications
Calibration Certificate
A calibration certificate is available for the sensor. To request the certificate, please email us the sensor serial number, and we will share the corresponding calibration certificate.
Items Included
1 × 7Semi SCD43 Breakout Board (ES-12295)
1 × Pin Header
Note: The Qwiic cable is not included and must be purchased separately.
Specifications
Supply Voltage Required (Vcc): 3.6V to 5.5V
Communication Interface: I2C
Operating Temperature: -10C to +60C
Temperature Accuracy: ±0.8°C typical from 15°C to 35°C
Operating Humidity: 0%RH to 95%RH, non-condensing
Humidity Accuracy: ±6%RH typical
Co2 Measurement Output Range: 0 – 40,000 ppm
Co2 Measurement Accuracy: ±(30 ppm + 3% of reading) at 400 ppm – 5,000 ppm
Dimension: 30mm x 22mm x 7.83mm
Measures CO2, temperature and relative humidity
CO₂ measurement range: 0ppm to 40,000ppm
CO₂ accuracy: +/-(30 ppm + 3% of measured value)
PASens photoacoustic NDIR technology for true CO2 measurement
Supports automatic self-calibration (ASC)
Supports forced recalibration (FRC)
Supports single-shot measurement
Easy integration through I2C interface
Compact breakout board for embedded and IoT applications