JYE Tech

JYE-Tech DSO150 Oscilloscope Kit Digital Oscilloscope DIY Kit Fully Assembled Tech 15001K DSO-Shell (DSO150) Digital Oscilloscope Kit With Housing Case Box - RS2425

SKU RS2425

This is a JYE Tech fully assembled tech DS0150 15001K DSO-Shell (DSO150) DIY digital oscilloscope kit. As we can see, an oscilloscope has a rarely high accuracy, which is unlike a

₹3748.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

This is a JYE Tech fully assembled tech DS0150 15001K DSO-Shell (DSO150) DIY digital oscilloscope kit. As we can see, an oscilloscope has a rarely high accuracy, which is unlike a multimeter but allows us to see the processes in the dynamics. Earlier oscilloscopes consisted of vacuum-tube which were then replaced by the transistor, but the result is still displayed on the CRT screen.

Eventually, they were replaced by their digital counterparts, smaller, lighter and more convenient. The collecting is certainly easy and even a schoolboy can do it in his own hands. The most important thing you have to do is choose a decent DIY Digital Oscilloscope Kit.

Specifications:

Number of channels: 1

Analog Bandwidth: 0 - 200KHz

Sensitivity: 5mV/Div - 20V/Div

Sensitivity Error: < 5%

Resolution: 12-bit

Input Impedance: 1M ohm

Maximum Input Voltage: 50Vpk

Coupling: DC, AC, GND

Max Real-Time Sampling Rate: 1Msps

Timebase: 10us/Div - 500s/Div

Record Length: 1024

Trigger Modes: Auto, Normal, Single

Trigger Types: Rising/falling edge

Trigger Position: 1/2 of buffer size fixed

Power Supply: 9V DC (please make sure the power supply is 9V, lower or higher than 9V will cause problems.)

Supply Current: 120mA @ 9V

2.4-inch color TFT LCD with 320 x 240 resolution

Pin Description:

Features:

DSO Shell has similar bandwidth as DSO138 though it contains significant improvements in structure, mechanical, and operation.

Display and MCU are now mounted on the same board (mainboard), avoiding using inter-board pin headers. Users’ feedback from DSO138 has shown that soldering on the pin headers is often problematic for many beginners. The Analog channel is placed on a separate board that contains most user-installed parts. This brings in better separation between analogue and digital circuits. Without the analogue portion, the mainboard is actually a general-purpose control board that can be used in many other applications. The mainboard is fully installed (except a few through-hole components) and factory-tested before packing.

This DIY Digital Oscilloscope Kit comes with a full enclosure. The front panel and top/bottom brackets are flexible for easy user modification.

A rotary encoder has been added. It makes parameter adjustment much quicker and easier.

The sensitivity of DSO Shell has been extended in both directions and is higher and wider than DSO138. It reaches 5mV/div --- 20V/div while DSO138 is only 10mV/div --- 5V/div.

DSO Shell runs on a 9V power supply. Users need to prepare their own power supply since it is not included in the kits. The power jack on the mainboard is a 5.5mm/2.1mm DC plug. An alternative 2-pin connector (0.1" pitch) is also provided for convenience to connect to different power sources.

Package Included:

1 x JYE-Tech DSO150 Oscilloscope Kit Digital Oscilloscope DIY Kit Fully Assembled Tech 15001K DSO-Shell (DSO150) Digital Oscilloscope Kit With Housing Case Box

DSO Shell has similar bandwidth as DSO138 though it contains significant improvements in structure, mechanical, and operation.

Display and MCU are now mounted on the same board (mainboard), avoiding using inter-board pin headers. Users’ feedback from DSO138 has shown that soldering on the pin headers is often problematic for many beginners. The Analog channel is placed on a separate board that contains most user-installed parts. This brings in better separation between analogue and digital circuits. Without the analogue portion, the mainboard is actually a general-purpose control board that can be used in many other applications. The mainboard is fully installed (except a few through-hole components) and factory-tested before packing.

This DIY Digital Oscilloscope Kit comes with a full enclosure. The front panel and top/bottom brackets are flexible for easy user modification.

A rotary encoder has been added. It makes parameter adjustment much quicker and easier.

The sensitivity of DSO Shell has been extended in both directions and is higher and wider than DSO138. It reaches 5mV/div --- 20V/div while DSO138 is only 10mV/div --- 5V/div.

DSO Shell runs on a 9V power supply. Users need to prepare their own power supply since it is not included in the kits. The power jack on the mainboard is a 5.5mm/2.1mm DC plug. An alternative 2-pin connector (0.1" pitch) is also provided for convenience to connect to different power sources.

Specifications

Number of channels1
Analog Bandwidth0 - 200KHz
Sensitivity5mV/Div - 20V/Div
Sensitivity Error< 5%
Resolution12-bit
Input Impedance1M ohm
Maximum Input Voltage50Vpk
CouplingDC, AC, GND
Max Real-Time Sampling Rate1Msps
Timebase10us/Div - 500s/Div
Record Length1024
Trigger ModesAuto, Normal, Single
Trigger TypesRising/falling edge
Trigger Position1/2 of buffer size fixed
Power Supply9V DC (please make sure the power supply is 9V, lower or higher than 9V will cause problems.)
Supply Current120mA @ 9V
2.4-inch color TFT LCD with 320 x 240 resolution

More in Oscilloscopes

You might also need