10 x 15 cm FR4 Copper Clad Plate Laminate Single Side PCB - RS2610
This Is A High Quality Single Sided Fr2 / Phenolic General Purpose PCB. It Is Used For Rapid Prototyping Design.
₹120.00 GST added at checkout
SKU RS137
It works well with its encoder IC pair HT12E. These two IC's together form an encoder and decoder pair. Its primary function is to decode the 12-bit data that is received by the
₹81.00
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Description:
This is a decoder IC. It works well with its encoder IC pair HT12E. These two IC's together form an encoder and decoder pair. Its primary function is to decode the 12-bit data that is received by the input pin. Since the IC comes with an in-built Oscillator, it is very easy to make this IC work. This IC should be powered by 5V. If you use this IC, then it is very important that your decoder should have the same address as that of the encoder. This IC is highly useful in wireless communication projects involving RF or IR.
Specifications:
18-pin DIP
Operating Voltage: 2.4V ~ 12.0V
Low Power and High Noise Immunity CMOS Technology
Built-in Oscillator needs only a 5% Resistor
Minimal External Components
Low Power and High Noise Immunity, CMOS Technology
Low Stand by Current: 0.1uA (typ.) at VDD=5V
Features:
Low noise immunity
Can decode up to 12-bit data without using any third device.
RF and IR wireless modules can interface directly
Pin Description:
Pin No
Function
Name
1
8-bit Address pins for input
A0
2
A1
3
A2
4
A3
5
A4
6
A5
7
A6
8
A7
9
Ground (0V)
Ground
10
4-bit Data/Address pins for output
D0
11
D1
12
D2
13
D3
14
Serial data input
Input
15
Oscillator output
Osc2
16
Oscillator input
Osc1
17
Valid transmission; active high
VT
18
Supply voltage; 5V (2.4V-12V)
Vcc
Pin Diagram:
Useful links:
HT12D Decoder IC
Package Included:
1 x HT12D Decoder IC
Low noise immunity
Can decode up to 12-bit data without using any third device.
RF and IR wireless modules can interface directly
| 18-pin DIP | |
| Operating Voltage | 2.4V ~ 12.0V |
| Low Power and High Noise Immunity CMOS Technology | |
| Built-in Oscillator needs only a 5% Resistor | |
| Minimal External Components | |
| Low Power and High Noise Immunity, CMOS Technology | |
| Low Stand by Current | 0.1uA (typ.) at VDD=5V |
More in ICs & Prototyping
This Is A High Quality Single Sided Fr2 / Phenolic General Purpose PCB. It Is Used For Rapid Prototyping Design.
₹120.00 GST added at checkout
The universal PCB board is easy to weld diode, resistor, transistor, capacitor, etc. With referencing letters and numbers printed on the Single side for easy reference of
₹31.50 GST added at checkout
This is a 12" x 12" (30 cm x 30 cm) copper-clad PCB. This copper clad is perfect for hobbyists & electronics engineers who have tried successfully making their own single-sided
₹247.50 GST added at checkout
The 12x18cm Double Sided PCB Board Tinned Through Holes Universal Printed Circuit Proto Board. This means the PCB has copper traces (conductors) on both sides of the board.
₹171.00 GST added at checkout