10 x 15 cm FR4 Copper Clad Plate Laminate Single Side PCB - RS2610
This Is A High Quality Single Sided Fr2 / Phenolic General Purpose PCB. It Is Used For Rapid Prototyping Design.
₹120.00 GST added at checkout
SKU RS6903
The 12x18cm Double Sided PCB Board Tinned Through Holes Universal Printed Circuit Proto Board. This means the PCB has copper traces (conductors) on both sides of the board.
₹171.00
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Description:
The 12x18cm Double Sided PCB Board Tinned Through Holes Universal Printed Circuit Proto Board. This means the PCB has copper traces (conductors) on both sides of the board. Double-sided PCBs allow for more complex circuit designs and can accommodate more components compared to single-sided boards.
This 12x18cm Double Sided PCB Board is designed for prototyping purposes. Prototyping boards often feature a grid of holes or pads spaced at a standard pitch (often 2.54mm or 0.1 inch), allowing components to be easily mounted and interconnected using soldering techniques.
Specifications:
Material: FR-4
Hole Size: 0.8 - 1.0 mm diameter.
Layers: Double-sided PCB with copper traces on both sides.
Features:
12x18cm Double Sided PCB Board is likely to have a solder mask coating applied. A solder mask is a protective layer that covers the copper traces on the board, except where the components are soldered. It helps prevent short circuits and corrosion.
The holes are typically spaced on a standard pitch, commonly 2.54 mm (0.1 inch) apart. This allows for easy mounting of through-hole components and prototyping.
The plated holes are pre-tinned/pre-coppered and very solid which makes them very easy to soldering components on.
Package Included:
1 x 12x18cm Double Sided PCB Board, Universal Soldering PCB Board, Tinned Through Holes Universal Printed Circuit Proto Board 2.54mm
12x18cm Double Sided PCB Board is likely to have a solder mask coating applied. A solder mask is a protective layer that covers the copper traces on the board, except where the components are soldered. It helps prevent short circuits and corrosion.
The holes are typically spaced on a standard pitch, commonly 2.54 mm (0.1 inch) apart. This allows for easy mounting of through-hole components and prototyping.
The plated holes are pre-tinned/pre-coppered and very solid which makes them very easy to soldering components on.
| Material | FR-4 |
|---|---|
| Hole Size | 0.8 - 1.0 mm diameter. |
| Layers | Double-sided PCB with copper traces on both sides. |
More in ICs & Prototyping
This Is A High Quality Single Sided Fr2 / Phenolic General Purpose PCB. It Is Used For Rapid Prototyping Design.
₹120.00 GST added at checkout
The universal PCB board is easy to weld diode, resistor, transistor, capacitor, etc. With referencing letters and numbers printed on the Single side for easy reference of
₹31.50 GST added at checkout
This is a 12" x 12" (30 cm x 30 cm) copper-clad PCB. This copper clad is perfect for hobbyists & electronics engineers who have tried successfully making their own single-sided
₹247.50 GST added at checkout
This is a 150Pcs 2.54mm Pitch DIP IC Sockets Adaptor Assortment Kit 6,8,14,16,18,24,28,40 Pin. This is an IC & Component Socket, DIP Socket kit. Which is comes with a plastic box.
₹898.50 GST added at checkout