About this product
Description:
This is DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit. This DSO138 digital oscilloscope kit adopts an ARM Cortex-M3 processor and a 2.4-inch TFT screen. It’s easy and reliable for circuit operation. It can display frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values. This boost converter is a great match for the DSO138 oscilloscope kit. It can be connected directly to the DSO138 motherboard(not included), making the DSO138 oscilloscope to be a portable oscilloscope for better use.
Specification:
Power Input: DC 9V(Power adapter is not included)
Maximum Real-Time Sampling Rate : 1Msps
Accuracy: 12Bit
Sampling Buffer Depth: 1024 bytes
Analog Bandwidth: 0 - 200KHz
Vertical Sensitivity: 10mV / Div - 5V / Div ( 1-2-5 progressive manner)
Input Impedance: 1MΩ
Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
The Horizontal Time Base Range: 10μs / Div - 50s / Div (1-2-5 progressive manner)
Features:
STM32F103C8 Microcontroller: The DSO138 Oscilloscope Kit Uses ARM Cortex-M3 Processor, and Includes a 2.4" Color TFT Display Screen, which Can be Used as ARM Test Development Board.
Various Digital Waveform Display: Including Frequency, Cycle, Pulse Width, Max/Min, Average, Peak Value and Effective Value, Can be Triggered by Rising or Falling Edges, Perfect for Arduino etc.
HOLD Function: With Automatic, Conventional and Single Trigger Mode Can Freeze at Any Time Waveform Display.
Fully Assembled and Soldered Professionally: Has been Soldered All the SMD, Including the Acrylic Case Kits, Need to be Installed by Yourself.
Adjustable Vertical Displacement, and with Instructions, which Increase the Likelihood of Adding Different Features or Developing New Applications on the Hardware for Users.
Coupling modes include DC / AC / GND.
With automatic, regular and one-shot mode, easy to capture the moment waveform.
Available rising or falling edge trigger.
Adjustable trigger level position, and with instructions.
Observable trigger waveform before ( negative delay).
Can freeze at any time waveform display (HOLD function).
Comes 1Hz /3.3V square wave test signal source.
Package Included:
1 x DSO138 Digital Oscilloscope
1 x Acrylic Cell
STM32F103C8 Microcontroller: The DSO138 Oscilloscope Kit Uses ARM Cortex-M3 Processor, and Includes a 2.4" Color TFT Display Screen, which Can be Used as ARM Test Development Board.
Various Digital Waveform Display: Including Frequency, Cycle, Pulse Width, Max/Min, Average, Peak Value and Effective Value, Can be Triggered by Rising or Falling Edges, Perfect for Arduino etc.
HOLD Function: With Automatic, Conventional and Single Trigger Mode Can Freeze at Any Time Waveform Display.
Fully Assembled and Soldered Professionally: Has been Soldered All the SMD, Including the Acrylic Case Kits, Need to be Installed by Yourself.
Adjustable Vertical Displacement, and with Instructions, which Increase the Likelihood of Adding Different Features or Developing New Applications on the Hardware for Users.
Coupling modes include DC / AC / GND.
With automatic, regular and one-shot mode, easy to capture the moment waveform.
Available rising or falling edge trigger.
Adjustable trigger level position, and with instructions.
Observable trigger waveform before ( negative delay).
Can freeze at any time waveform display (HOLD function).
Comes 1Hz /3.3V square wave test signal source.