FNIRSI

FNIRSI DPOS350P 350MHz 1GSPS 4-in-1 Tablet Oscilloscope High-Performance 1GSPS Sampling Waveform Generator For Comprehensive Signal Analysis - RS8458

SKU RS8458

The DPOS350P is a high-performance, feature-rich all-in-one oscilloscope, suitable for a wide range of industrial and research applications.

₹29998.80

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

The DPOS350P is a high-performance, feature-rich all-in-one oscilloscope, suitable for a wide range of industrial and research applications. With its powerful integrated design, high sampling rate, and wide bandwidth, it can accurately analyze complex signals, provide a clear waveform display, and smart triggering.

The built-in high-resolution display, touch operation, intelligent triggering, and multiple measurement modes make it a precise and reliable tool for testing and analysis in laboratories, production lines, and maintenance sites.

Basic Parameter Specifications:

Brand  FNIRSI

Power-on configuration 5 preset items

Charging requirements QC18W - 12V/1.5A (Type-C)

Languages Chinese / English / Russian / Portuguese

Battery specifications 3.7V, 8000mAh lithium battery

Standby time about 3 hours

Screen resolution 1024 x 600 pixels

Charging time Startup ≈ 5 Hours

Screen technology IPS full viewing angle

Total power consumption 10W

Interaction mode capacitive touch screen

Heat dissipation

air cooling

Expansion interface capacitive touch screen

Automatic shutdown 15 minutes ~ 1 hour / off

Firmware upgrade support iso image upgrade

Storage Temperature Range -20~60℃

Oscilloscope Parameters Specifications:

Analog Channels 2

Analog bandwidth 350MHz

Rise time 1nS

Max sampling rate 1GSPS

Memory depth 60Kpts

Input impedance 1MΩ / 14PF

Time base range 5nS ~ 50S

Roll time base 50mS ~ 50S

Vertical sensitivity 2mV ~ 20V(1X)

Vertical range 16mV ~ 160V(1X)

DC accuracy ±2%

Time accuracy ±0.01%

Input coupling DC / AC

Probe attenuation 1X / 10X / 100X

Hardware bandwidth limit 150M / 20M

High resolution mode

8bit ~ 16bit

Parameter measurements 12 types

Cursor measurement time, period, frequency, level, voltage

Trigger detection digital trigger

Trigger channel CH1 / CH2

Trigger mode Auto / Single / Normal

Trigger edge rising edge / falling edge

Trigger suppression L1 ~ L3

Trigger level manual/automatic 10% ~ 90%

Screenshot storage 90 pictures

Waveform storage 500 groups

Background grid display/hide

Waveform movement coarse adjustment / fine adjustment

Overvoltage protection Withstand voltage 400V

Waveform brightness adjustable

Simple FFT display support

Digital fluorescence support

Color temperature display support

X-Y mode support

ZOOM time base support

One-key automatic adjustment support

One-key return to zero support

Data browser support

Signal Generator Parameters:

Waveform types 14 standard functions + captured waveform

Frequency 0 ~ 50MHz(sine wave only, other waveforms up to 10M/5M/3M)

Amplitude 0 ~ 5VPP

Offset -2.5V ~ +2.5V

Duty cycle 0.1% ~ 99.9%

Frequency resolution 1Hz

Amplitude resolution 1mV

Offset resolution 1mV

Duty cycle resolution 0.1%

Customizable captured waveform 500 groups

Frequency Response Analyzer Section:

Excitation signal frequency 100Hz ~ 50MHz

Excitation signal amplitude 0 ~ 5VPP

Excitation signal offset -2.5V ~ +2.5V

Excitation frequency count 20 ~ 500

Cursor measurement frequency/gain/phase

Operating mode single/cyclic

System calibration support

Spectrum Analyzer Part:

Conversion method FFT

FFT length 4K ~ 32K

Frequency range 200KHz ~ 350MHz

Level range 60dBmV ~ +260dBmV

Cursor measurement frequency/amplitude

Marking parameter maximum energy harmonic

Waterfall chart support

3D waterfall chart support

Automatic adjustment support

System calibration support

Features:

The DPOS350P combines a 350MHz oscilloscope, 50MHz signal generator, 200K~350MHz spectrum analyzer, and a 50MHz frequency response analyzer to meet various signal testing needs.

With a 1GSPS real-time sampling rate, 350MHz analog bandwidth (single-channel mode), and an ultra-high 50,000 wfm/s waveform refresh rate, it can accurately capture and display low-probability anomaly signals.

Equipped with a 7-inch 1024x600 high-resolution IPS touchscreen, it provides clear waveform display and supports grayscale and color temperature mode switching, making it easy to operate in different testing environments.

The built-in 50MHz signal generator supports 14 standard waveforms and custom waveform functionality, while the spectrum analyzer covers a frequency range of 200K~350MHz, ideal for EMI, RF, and high-frequency signal testing.

The device has a high-voltage protection design up to 400V for safety, and with QC18W fast charging technology, it can be fully charged in 2 hours, ensuring long-term stable operation.

It supports up to 500 waveform data storage and 90 image storage, and has USB data export functionality for easy analysis and report generation

Package Included:

1 x DPOS350P Oscilloscope

1 x Packaging Box

1 x User Manual

2 x 350MHz Probes

1 x USB data Cable

1 x Alligator Clip

1 x QC18W Fast Charger

The DPOS350P combines a 350MHz oscilloscope, 50MHz signal generator, 200K~350MHz spectrum analyzer, and a 50MHz frequency response analyzer to meet various signal testing needs.

With a 1GSPS real-time sampling rate, 350MHz analog bandwidth (single-channel mode), and an ultra-high 50,000 wfm/s waveform refresh rate, it can accurately capture and display low-probability anomaly signals.

Equipped with a 7-inch 1024x600 high-resolution IPS touchscreen, it provides clear waveform display and supports grayscale and color temperature mode switching, making it easy to operate in different testing environments.

The built-in 50MHz signal generator supports 14 standard waveforms and custom waveform functionality, while the spectrum analyzer covers a frequency range of 200K~350MHz, ideal for EMI, RF, and high-frequency signal testing.

The device has a high-voltage protection design up to 400V for safety, and with QC18W fast charging technology, it can be fully charged in 2 hours, ensuring long-term stable operation.

It supports up to 500 waveform data storage and 90 image storage, and has USB data export functionality for easy analysis and report generation

More in Oscilloscopes

You might also need