About this product
Description:
FlySky FS-iA10B Radio Receiver Building upon the solid foundation of its popular predecessor, the FlySky iA6 B receiver, FlySky now introduces a 10-channel powerhouse: the FlySky FS-iA10B Radio Receiver. Mirroring the versatility of the FS-iA6B, this advanced receiver boasts compatibility with a range of digital and analog protocols, including the streamlined iBUS and SBUS, the efficient PPM, and the traditional PWM, offering pilots enhanced control flexibility for diverse setups.
A significant advantage offered by PPM and SBUS over conventional PWM lies in their elegant simplicity. Instead of dedicating a signal wire to each channel, these protocols transmit all channel information through a single wire. This drastically simplifies wiring, particularly for flight controllers like the Naze32 that support PPM. Furthermore, the iA10B opens up a world of telemetry possibilities. By integrating optional sensors, you can extend the receiver's functionality to monitor crucial flight parameters such as battery voltage and even the rotational speed of your motors, providing valuable real-time.
This comprehensive 10-channel receiver proves its mettle across a wide spectrum of model aircraft, earning its designation as a "full range" receiver capable of confidently handling both large and small models. Equipped with dual antennas, the FS-iA10B delivers exceptional reception, reportedly exceeding 1 kilometer, along with impressive resistance to interference. To maximize its performance, ensure the antennas are strategically positioned at a 90-degree angle relative to each other.
Specifications:
Item Type: Receiver
No. of Channels: 10
Number of Bands: 140
Modulation Type: GFSK
RF Range: 2.4055–2.475 GHz.
Sensitivity: -105dBm
Signal Output: IBUS, PPM
Operating Voltage: 4.0 ~ 6.5VDC
Current Consumption: ≤40mA
Control Distance: 400 m+
i-Bus Interface: Yes
Antenna Gain: 2dB
Antenna Length: 110mm
Color: Black
Features:
Reliable 2.4GHz AFHDS 2A Signal
Compact and Lightweight
Dual Antennas for Strong Reception
Telemetry Sensor Ports
How to bind the RX (receiver) to the TX (transmitter):
Plug the bind plug into the BAT, turn on the plane/heli, and the LED light should flash (make sure power is connected to the RX via the ESC)
Hold down the bind button on the transmitter module while turning on the TX
The light should go steady now
Let go of the bind button, turn off the plane/heli, remove the bind plug, and turn off the TX
Turn on TX and then turn on the plane/heli
Compatible Radios:
Flysky i4
Flysky i6 / Turnigy i6
Flysky / Turnigy i10
FS-GT2E
FS-GT2G
Package Included:
1 x FlySky FS-iA10B Radio Receiver
1 x Bind Plug
Reliable 2.4GHz AFHDS 2A Signal
Compact and Lightweight
Dual Antennas for Strong Reception
Telemetry Sensor Ports