FlySky

FlySky FS-GR3E 2.4GHz 3CH AFHDS RC Receiver - RS3029

SKU RS3029

RS3029 is an FS-GR3E 2.4GHz receiver for RC cars and boats using the FlySky AFHDS radio protocol. It provides three PWM channel outputs for a steering servo, an electronic speed

₹1063.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

FlySky FS-GR3E 3-channel surface receiver RS3029 is an FS-GR3E 2.4GHz receiver for RC cars and boats using the FlySky AFHDS radio protocol. It provides three PWM channel outputs for a steering servo, an electronic speed controller and a suitable auxiliary device. It is a receiver only, not a transmitter, motor driver or complete radio-control system. Check compatibility first Match the radio protocol as well as the model name. Established AFHDS surface transmitters such as the FS-GT2, FS-GT2B, FS-GT3B and FS-GT3C are commonly paired with this receiver. Where a transmitter offers selectable protocols, follow its manual and select the compatible AFHDS mode. A 2.4GHz label alone does not establish compatibility. Do not assume operation with an AFHDS 2A-only, AFHDS 3 or ANT-only transmitter. Connections and power

CH1: normally used for steering.

CH2: normally used for the ESC throttle signal.

BIND/CH3: binding connection, then the third PWM output in normal use.

VCC: receiver power connection.

Read the S, + and - markings on the supplied case before inserting plugs.

Use a regulated receiver supply within 4.5-6.5V DC; a suitable regulated 5V BEC is a practical choice when supported by the ESC and servos. Check their voltage limits too. Do not connect a raw 2S LiPo or the propulsion motor to receiver pins. The ESC, not this receiver, handles motor power. Follow the ESC/BEC instructions to avoid feeding the receiver from two power sources at once. Binding and first test Keep propulsion disabled and wheels or propellers clear while setting up. With receiver power off, fit the bind plug to BIND/CH3. Follow the compatible transmitter's binding sequence and check for a steady receiver signal indicator. Switch off before removing the bind plug, then restart and test steering direction, throttle neutral and channel response. Set the throttle-channel failsafe and verify the CH2 response to signal loss with the model safely restrained. Do not assume a previous failsafe setting is correct for a different ESC. Mount the receiver away from motor and ESC noise, support the antenna without cutting or sharply bending it, and perform a range check at the operating site. No waterproof rating or guaranteed operating distance is claimed. Package 1 x FS-GR3E receiver, 1 x antenna tube and 1 x bind plug. Transmitter, ESC, servos, battery and model are not included.

More in Transmitters & Receivers

You might also need