DFRobot

DFRobot Gravity: Analog TDS Sensor/Meter for Arduino - Professional-Grade Water Sensor Quality Analysis With High-Accuracy Measurement of Total Dissolved Solids And Analog Output for Arduino Integrati

SKU REES-1368ACCF4C69858B

TDS (Total Dissolved Solids) indicates how many milligrams of soluble solids are dissolved in one liter of water.

₹2155.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

DFRobot Gravity: Analog TDS Sensor/Meter for Arduino is an Arduino-compatible TDS Meter Kit for measuring the TDS value of the water, to reflect the cleanliness of the water. TDS meter can be applied to domestic water, hydroponic, and other fields of water quality testing with this product, you can easily DIY a TDS detector to reflect the cleanliness of water to protect your health.

TDS (Total Dissolved Solids) indicates how many milligrams of soluble solids are dissolved in one liter of water. In general, the higher the TDS value, the more soluble solids dissolved in water, and the less clean the water is. Therefore, the TDS value can be used as one of the references for reflecting the cleanliness of water. The probe can not be used in water above 55 degrees centigrade.

The probe can not be left too close to the edge of the container, otherwise, it will affect the reading. The head and the cable of the probe are waterproof, but the connector and the signal transmitter board are not waterproof. Please be careful.

Specifications:

Signal Transmitter Board

Input Voltage: 3.3 ~ 5.5V

Output Voltage: 0 ~ 2.3V

Working Current: 3 ~ 6mA

TDS Measurement Range: 0 ~ 1000ppm

TDS Measurement Accuracy: ± 10% F.S. (25 ℃)

Module Size: 42 * 32mm

Module Interface: PH2.0-3P

Electrode Interface: XH2.54-2P

TDS probe

Number of Needles: 2

Total Length: 83cm

Connection Interface: XH2.54-2P

Color: Black

Other: Waterproof Probe

Features:

Wide Voltage Input: 3.3~5.5V

Good Compatibility Output: 0~2.3V analog signal output, compatible with 5V or 3.3V controller

AC Excitation Source: effectively prevents the probe from polarization

Waterproof Probe

Easy to Use: Arduino compatible, simple connection, plug, and play without soldering

Projects:

Project 1. Arduino Hydroponics, DIY Hydroponics System using pH Sensor& EC Sensor, Hydroponic

Project 2. TDS Sensor & Arduino Interfacing for Water Quality Monitoring

Introduction: This project will interface the Gravity Analog TDS Sensor with an Arduino Microcontroller and read the value in a 16×2 LCD Display.

Project 3. TDS Sensor and ESP32 IoT-based Water Quality Monitoring System, IoT TDS sensor, ESP32 TDS Sensor

Introduction: This project shows you how to make an IoT IoT-based water Quality Monitoring System using a TDS Sensor, DS18B20 waterproof one-wire digital temperature sensor, and ESP32 Wifi + Bluetooth Module.

Project 4. Make a TDS Detector for Water Testing Experiment

Introduction: This project introduces DIY a TDS meter with my analog TDS sensor, and uses the meter to detect the TDS of tap water before and after filtration. Moreover, I can use it to do some interesting experiments. Let's have a go.

Project 5. DFROBOT TDS Meter Sensor With Arduino & LCD || Measure Water Quality in PPM

Introduction: This project will interface the Gravity Analog TDS Sensor with Arduino Microcontroller and read the value in a 16x2 LCD Display.

Useful Links:

DFRobot Gravity: Analog TDS Sensor/ Meter

Package Included:

1 x Analog TDS Meter for Arduino

1 x Waterproof TDS Probe

1 x 3Pin Analog Sensor Cable

Wide Voltage Input: 3.3~5.5V

Good Compatibility Output: 0~2.3V analog signal output, compatible with 5V or 3.3V controller

AC Excitation Source: effectively prevents the probe from polarization

Waterproof Probe

Easy to Use: Arduino compatible, simple connection, plug, and play without soldering

Specifications

Signal Transmitter Board
Input Voltage3.3 ~ 5.5V
Output Voltage0 ~ 2.3V
Working Current3 ~ 6mA
TDS Measurement Range0 ~ 1000ppm
TDS Measurement Accuracy± 10% F.S. (25 ℃)
Module Size42 * 32mm
Module InterfacePH2.0-3P
Electrode InterfaceXH2.54-2P
TDS probe
Number of Needles2
Total Length83cm
Connection InterfaceXH2.54-2P
ColorBlack
OtherWaterproof Probe

More in Water & Liquid Sensors

You might also need