1/2'' Water Flow Sensor or Fluid Flowmeter Control Switch for Arduino Raspberry and Other Mcu Model-YF-S201- SR040

SKU SR040

1/2″ nominal pipe connections, 0.78″ outer diameter, 1/2″ of thread. 1 x 1/2'' Water Flow Sensor or Fluid Flowmeter Control Switch for Arduino Raspberry and Other Mcu Model-YF-S201

₹277.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Model: YF-S201

Sensor Type: Hall effect

Working Voltage: 5 to 18V DC (min tested working voltage 4.5V)

Max current draw: 15mA @ 5V

Output Type: 5V TTL

Description: The water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, the rotor rolls. Its speed changes with a different rate of flow. The hall-effect sensor outputs the corresponding pulse signal. This one is suitable to detect flow in a water dispensers or coffee machines. We have a comprehensive line of water flow sensors in different diameters. Check them out to find the one that meets your need most.Specification:

Model: YF-S201

Sensor Type: Hall effect

Working Voltage: 5 to 18V DC (min tested working voltage 4.5V)

Max current draw: 15mA @ 5V

Output Type: 5V TTL

Working Flow Rate: 1 to 30 Liters/Minute

Working Temperature range: -25 to +80℃

Working Humidity Range: 35%-80% RH

Accuracy: ±10%

Maximum water pressure: 2.0 MPa

Output duty cycle: 50% +-10%

Output rise time: 0.04us

Output fall time: 0.18us

Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min)

Pulses per Liter: 450

Durability: minimum 300,000 cycles

Features:

1/2″ nominal pipe connections, 0.78″ outer diameter, 1/2″ of thread.

Compact, Easy to Install

High Sealing Performance

High-Quality Hall Effect Sensor

Connection:

Red wire:+5V

Black wire:GND

Yellow wire:PWM output

Package Included: 1 x 1/2'' Water Flow Sensor or Fluid Flowmeter Control Switch for Arduino Raspberry and Other Mcu Model-YF-S201

1/2″ nominal pipe connections, 0.78″ outer diameter, 1/2″ of thread.

Compact, Easy to Install

High Sealing Performance

High-Quality Hall Effect Sensor

Specifications

ModelYF-S201
Sensor TypeHall effect
Working Voltage5 to 18V DC (min tested working voltage 4.5V)
Max current draw15mA @ 5V
Output Type5V TTL
Working Flow Rate1 to 30 Liters/Minute
Working Temperature range-25 to +80℃
Working Humidity Range35%-80% RH
Accuracy±10%
Maximum water pressure2.0 MPa
Output duty cycle50% +-10%
Output rise time0.04us
Output fall time0.18us
Flow rate pulse characteristicsFrequency (Hz) = 7.5 * Flow rate (L/min)
Pulses per Liter450
Durabilityminimum 300,000 cycles

More in Water & Liquid Sensors

You might also need