DFRobot

DFRobot G1/2 Flow Sensor Gravity Liquid Flow Sensor Flow Rate Sensor Non-Invasive Liquid Flow Measurement - RS6796

SKU RS6796

This DFRobot Gravity Liquid Flow Sensor is based on the electromagnetic principle. It adopts an O-ring rubber seal and uses silicone sealant at the outlet end to ensure good

₹2107.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

This DFRobot Gravity Liquid Flow Sensor is based on the electromagnetic principle. It adopts an O-ring rubber seal and uses silicone sealant at the outlet end to ensure good waterproofing. It embraces high anti-electromagnetic interference and anti-vibration capabilities, offering reliable performance and long service life.

The sensor can be used with microcontrollers like the Arduino UNO to measure the flow of liquids with high concentration and low viscosity like water, diesel, engine oil, milk, paint, detergent, honey and more (no impurity in liquid).

Specifications:

Operating Voltage: DC3.5~24V

Operating Current: ≤10mA (DC5V)

Output Mode: NPN pulse signal

Pipe Diameter: G1/2

Thread I.D.: 10mm

Thread O.D.: 20.5mm

Thread Length: 29mm

Water Pressure Resistance: ≤1.2MPA

Insulation Resistance: 100MΩ

Flow Range: 30-1200L/H

Error: ±1% (5-600L/H)

Output Pulse High Level: DC4.7V (input voltage DC5V)

Output Pulse Low Level: <DC0.5V (input voltage DC5V)

Output Pulse Duty Ratio: 50%±10%

Flow & Pulse Correlation: 1L=150 pulses

Operating Temperature: ≤80°C

Operating Humidity: 35%~90%RH (No condensing)

Storage Temperature: -25°~+80°C

Storage Humidity: 25%~95%RH

Dimensions: 80*47*37mm/3.15*1.85*1.46

Features:

Gravity interface, easy to wire

A wide voltage of 3.5~24

Measure the flow of the high-concentration but low-viscosity liquid

RoHS compliant

Package Included:

1 x DFRobot G1/2 Flow Sensor Gravity Liquid Flow Sensor Flow Rate Sensor Non-Invasive Liquid Flow Measurement

Gravity interface, easy to wire

A wide voltage of 3.5~24

Measure the flow of the high-concentration but low-viscosity liquid

RoHS compliant

Specifications

Operating VoltageDC3.5~24V
Operating Current≤10mA (DC5V)
Output ModeNPN pulse signal
Pipe DiameterG1/2
Thread I.D.10mm
Thread O.D.20.5mm
Thread Length29mm
Water Pressure Resistance≤1.2MPA
Insulation Resistance100MΩ
Flow Range30-1200L/H
Error±1% (5-600L/H)
Output Pulse High LevelDC4.7V (input voltage DC5V)
Output Pulse Low Level<DC0.5V (input voltage DC5V)
Output Pulse Duty Ratio50%±10%
Flow & Pulse Correlation1L=150 pulses
Operating Temperature≤80°C
Operating Humidity35%~90%RH (No condensing)
Storage Temperature-25°~+80°C
Storage Humidity25%~95%RH
Dimensions80*47*37mm/3.15*1.85*1.46

More in Water & Liquid Sensors

You might also need