DFRobot

DFRobot Fermion NO2 Gas Sensor: MEMS Nitrogen Dioxide Detection (0.1-10ppm), Breakout Board

SKU REES-4DD7FD6CFEB98558

The MEMS series currently encompasses 11 different types of gas sensors (HCHO, CO, CH4, VOC, NH3, H2S, EtOH, Smoke, Odor, H2, and NO2), which can be combined as per specific

₹1369.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

Fermion: MEMS Nitrogen Dioxide NO2 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat generation, short preheating time, and swift response recovery. The sensor can qualitatively measure the concentration of nitrogen dioxide gas and is suitable for nitrogen dioxide detectors, automobile exhaust detection, and other application scenarios.

The MEMS series currently encompasses 11 different types of gas sensors (HCHO, CO, CH4, VOC, NH3, H2S, EtOH, Smoke, Odor, H2, and NO2), which can be combined as per specific requirements.

Note:

This sensor is capable of only qualitative measurements. For quantitative measurements, kindly consider purchasing the Gravity: Factory Calibrated Electrochemical Gas Sensor Series.

Specifications:

Gas detected: NO2

Detection range: 0.1-10ppm

Operating voltage: 3.3-5V

Operating current: <20mA

Output signal: Analog voltage

Sensitivity: R0(in air)/Rs(in 5ppm NO2) ≥ 0.5

Operating temperature: -10-50℃

Operating humidity: 15-90%RH (non-condensing)

Lifespan: ≥5 years (in air)

Dimension:13×13 x 2.5mm/0.0.51×0.51x0.1"

Features:

Compact size, measuring only 13*13*2.5mm

Low power consumption, operating current <20mA

High sensitivity and rapid response recovery

Advanced MEMS technology

Precautions For Use:

Kindly remove the protective film before usage.

To prevent exposure to volatile silicon compounds vapors (such as silicone adhesive, hair gel, silicone rubber, or other locations where volatile silicon compounds are present).

Avoid exposure to high concentrations of corrosive gases (such as H2S, SOX, Cl2, HCl, etc.).

Prevent contamination from alkalis, alkali metal salts, and halogens.

Refrain from prolonged exposure to extreme environments (such as high temperatures, high humidity, and high pollution).

Avoid contact with water, condensation, and freezing.

Minimize excessive vibration, impact, and dropping.

Please refrain from employing this module in systems that involve personal safety concerns.

For extended periods of non-usage, it is advisable to preheat the module for at least 24 hours.

Applications:

Air quality monitoring: measures the level of NO2 and other pollutants in the ambient air.

Automotive emission control: monitors the NO2 emission from vehicles and adjusts the fuel injection and combustion parameters to reduce the emission.

Industrial safety: detects the leakage or exposure of NO2 and other toxic gases in industrial processes or workplaces.

Projects:

Project: Building an Electronic Nose with MEMS Gas Detection Sensor Breakout Series and Edge Impulse Platform

Introduction: In this project, I developed an electronic nose using DFRobot mems series gas sensors and the Edge Impulse platform, which is capable of identifying the scents of beverages and fruits.

Useful Links:

Gas Detection Sensor

Schematics & Dimension

Characteristic Parameter

Package Included:

1 x Fermion: MEMS Nitrogen Dioxide NO2 Gas Detection Sensor

1 x 2.54mm pitch header pin

Compact size, measuring only 13*13*2.5mm

Low power consumption, operating current <20mA

High sensitivity and rapid response recovery

Advanced MEMS technology

Specifications

Gas detectedNO2
Detection range0.1-10ppm
Operating voltage3.3-5V
Operating current<20mA
Output signalAnalog voltage
SensitivityR0(in air)/Rs(in 5ppm NO2) ≥ 0.5
Operating temperature-10-50℃
Operating humidity15-90%RH (non-condensing)
Lifespan≥5 years (in air)
Dimension:13×13 x 2.5mm/0.0.51×0.51x0.1"

More in Gas & Flame Sensors

You might also need