DFRobot

DFRobot Fermion: HCHO Gas Sensor MEMS Formaldehyde Sensor HCHO Gas Detector Breakout Board 0-3ppm Sensor Arduino Compatible HCHO Sensor Formaldehyde Sensor for Air Quality Monitoring - RS6587

SKU RS6587

The MEMS series currently encompasses 11 different types of gas sensors (HCHO, CO, CH4, VOC, NH3, H2S, EtOH, Smoke, Odor, H2, and NO2), which can be combined as per specific

₹895.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

Fermion: MEMS Formaldehyde HCHO Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat generation, short preheating time, and swift response recovery. This sensor qualitatively measures the concentration of formaldehyde gas, making it suitable for applications in air purifiers, HVAC systems, smart wearables, portable detectors, and more.

The MEMS series currently encompasses 11 different types of gas sensors (HCHO, CO, CH4, VOC, NH3, H2S, EtOH, Smoke, Odor, H2, and NO2), which can be combined as per specific requirements.

Please note: This sensor is capable of qualitative measurements only. For quantitative measurements, kindly consider purchasing the Gravity: Factory Calibrated Electrochemical Gas Sensor Series.

Specifications:

Gas detected: HCHO

Detection range: 0-3ppm

Operating voltage: 3.3-5V

Operating current: <20mA

Output signal: Analog voltage

Sensitivity: R0(in air)/Rs(in 0.4ppm HCHO) ≥ 1.8

Operating temperature: -10-50℃

Operating humidity: 15-90%RH (non-condensing)

Lifespan: ≥3 years (in air)

Dimension:13×13 x 2.5mm/ 0.0.51×0.51x0.1"

Features:

Compact size, measuring only 13*13*2.5mm

Low power consumption, operating current <20mA

High sensitivity and rapid response recovery

Advanced MEMS technology

Precautions for use:

Kindly remove the protective film before usage.

To prevent exposure to volatile silicon compounds vapors (such as silicone adhesive, hair gel, silicone rubber, or other locations where volatile silicon compounds are present).

Avoid exposure to high concentrations of corrosive gases (such as H2S, SOX, Cl2, HCl, etc.).

Prevent contamination from alkalis, alkali metal salts, and halogens.

Refrain from prolonged exposure to extreme environments (such as high temperatures, high humidity, and high pollution).

Avoid contact with water, condensation, and freezing.

Minimize excessive vibration, impact, and dropping.

Please refrain from employing this module in systems that involve personal safety concerns.

For extended periods of non-usage, it is advisable to preheat the module for at least 24 hours.

Applications:

Air purifiers

HVAC systems

Smart wearables

Portable detectors

Project:

Project: Building an Electronic Nose with MEMS Gas Detection Sensor Breakout Series and Edge Impulse Platform

Introduction: In this project, I developed an electronic nose using DFRobot mems series gas sensors and the Edge Impulse platform, which is capable of identifying the scents of beverages and fruits.

Useful Link:

DFRobot Fermion HCHO Gas Sensor

Package Included:

1 x Fermion: MEMS Formaldehyde HCHO Gas Detection Sensor (breakout)

1 x 2.54mm pitch header pin

Compact size, measuring only 13*13*2.5mm

Low power consumption, operating current <20mA

High sensitivity and rapid response recovery

Advanced MEMS technology

Specifications

Gas detectedHCHO
Detection range0-3ppm
Operating voltage3.3-5V
Operating current<20mA
Output signalAnalog voltage
SensitivityR0(in air)/Rs(in 0.4ppm HCHO) ≥ 1.8
Operating temperature-10-50℃
Operating humidity15-90%RH (non-condensing)
Lifespan≥3 years (in air)
Dimension:13×13 x 2.5mm/ 0.0.51×0.51x0.1"

More in Gas & Flame Sensors

You might also need