DFRobot

DFRobot Fermion CO Gas Sensor: MEMS Carbon Monoxide Detection 5-5000ppm Breakout Board - RS9700

SKU RS9700

The MEMS series currently encompasses 11 different types of gas sensors (HCHO, CO, CH4, VOC, NH3, H2S, EtOH, Smoke, Odor, H2, and NO2), which can be combined as per specific

₹895.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

Fermion: MEMS Carbon Monoxide CO Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20 mA), minimal heat generation, a short preheating time, and swift response recovery. The sensor can measure carbon monoxide gas concentrations qualitatively and is suitable for carbon monoxide leak alarms and portable carbon monoxide detectors.

The MEMS series currently encompasses 11 different types of gas sensors (HCHO, CO, CH4, VOC, NH3, H2S, EtOH, Smoke, Odor, H2, and NO2), which can be combined as per specific requirements.

Please note: This sensor is capable of only qualitative measurements. For quantitative measurements, kindly consider purchasing the Gravity: Factory Calibrated Electrochemical CO Sensor (0-1000 ppm, I2C & UART).

Specifications:

Gas detected: CO

Detection range: 5-5000ppm

Operating voltage: 3.3-5V

Operating current: <20 mA

Output signal: Analog voltage

Sensitivity: R0(in air)/Rs(in 150ppm CO) ≥ 3

Operating temperature: -10-50℃

Operating humidity: 15-90%RH (non-condensing)

Lifespan: ≥5 years (in air)

Dimension:13×13 x 2.5mm/0.0.51×0.51x0.1"

Features:

Compact size, measuring only 13*13*2.5mm

Low power consumption

High sensitivity and rapid response recovery

Advanced MEMS technology

Precautions For Use:

Kindly remove the protective film before usage.

To prevent exposure to volatile silicon compounds vapors (such as silicone adhesive, hair gel, silicone rubber, or other locations where volatile silicon compounds are present).

Avoid exposure to high concentrations of corrosive gases (such as H2S, SOX, Cl2, HCl, etc.).

Prevent contamination from alkalis, alkali metal salts, and halogens.

Refrain from prolonged exposure to extreme environments (such as high temperatures, high humidity, and high pollution).

Avoid contact with water, condensation, and freezing.

Minimize excessive vibration, impact, and dropping.

Please refrain from employing this module in systems that involve personal safety concerns.

For extended periods of non-usage, it is advisable to preheat the module for at least 24 hours.

Applications:

Petrochemical carbon monoxide detection

Metallurgy carbon monoxide detection

Mining carbon monoxide detection

Environmental protection

Projects:

Project: Building an Electronic Nose with MEMS Gas Detection Sensor Breakout Series and Edge Impulse Platform

Introduction: In this project, I developed an electronic nose using DFRobot mems series gas sensors and the Edge Impulse platform, which can identify the scents of beverages and fruits.

Useful Links:

Product wiki

Schematics & Dimension

Characteristic Parameter

Package Included:

1 x Fermion: MEMS Carbon Monoxide CO Sensor (breakout)

1 x 2.54mm pitch header pin

Compact size, measuring only 13*13*2.5mm

Low power consumption

High sensitivity and rapid response recovery

Advanced MEMS technology

Specifications

Gas detectedCO
Detection range5-5000ppm
Operating voltage3.3-5V
Operating current<20 mA
Output signalAnalog voltage
SensitivityR0(in air)/Rs(in 150ppm CO) ≥ 3
Operating temperature-10-50℃
Operating humidity15-90%RH (non-condensing)
Lifespan≥5 years (in air)
Dimension:13×13 x 2.5mm/0.0.51×0.51x0.1"

More in Gas & Flame Sensors

You might also need