CP2102 USB 2.0 to TTL UART serial converter Module - 6 Pin- RS2970

SKU RS2970

CP2102 USB-to-TTL UART Converter, 6 Pin Add a computer serial connection to a compatible embedded project with this CP2102 USB-to-UART converter.

₹178.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

CP2102 USB-to-TTL UART Converter, 6 Pin

Add a computer serial connection to a compatible embedded project with this CP2102 USB-to-UART converter. Its USB Type-A plug connects to the host computer, while the six-pin header breaks out the board's logic-level serial and supply connections. Use it for serial terminals, debugging and firmware-loading workflows supported by the target device.

Key features

Silicon Labs CP2102 USB-to-UART bridge.

USB Type-A plug and six-pin header.

Board connections marked DTR, RXI, TXO, 5V, 3V3 and GND.

Separate 5V and 3.3V supply connections; these are not a selectable UART voltage guarantee.

CP2102 UART supports rates up to 921600 baud, subject to host, driver and target support.

Wiring guidance Match the printed pin labels rather than assuming a standard cable order. Connect TXO to the target's receive input, RXI to its transmit output, and GND to ground. Check signal-level compatibility before connecting the target. The CP2102 uses 3.3V-domain UART signalling; the board's 5V pin is a supply connection, not proof of 5V TX output.

DTR can be used by designs with a suitable automatic-reset circuit, but it does not make this adapter compatible with every development board. A serial bootloader, correct reset circuit and matching programming settings are still required. Do not connect the UART pins directly to RS232 or RS485 wiring.

Driver setup Use Silicon Labs' current CP210x virtual-COM-port driver when your operating system needs one. Select the detected serial port and matching baud rate in your software. Check the target's power needs before drawing current from an adapter supply pin, and avoid conflicting power sources.

Package contents 1 x CP2102 USB-to-TTL UART converter module, 6 pin

Silicon Labs CP2102 USB-to-UART bridge.

USB Type-A plug and six-pin header.

Board connections marked DTR, RXI, TXO, 5V, 3V3 and GND.

Separate 5V and 3.3V supply connections; these are not a selectable UART voltage guarantee.

CP2102 UART supports rates up to 921600 baud, subject to host, driver and target support.

More in USB & UART Interfaces

You might also need