20A range ACS712 current sensor module Detector - RS406
The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die.
₹133.50 GST added at checkout
SKU REES-63BCB6E6ABF0C382
The ACPL-C870-000E functions as an optical isolation amplifier, providing a safe and reliable way to measure voltages without a direct electrical connection between the sensing
₹979.50
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Description:
The ACPL-C870-000E functions as an optical isolation amplifier, providing a safe and reliable way to measure voltages without a direct electrical connection between the sensing circuit and the measurement circuitry. This isolation is crucial for protecting sensitive components and personnel from high voltages and common-mode noise.
The sensor's 2V input range and high 1Gohm input impedance make it well-suited for isolated voltage sensing in electronic power converters. Typically, a resistive voltage divider is used to scale the DC link voltage down to a level compatible with the sensor's input range. The ACPL-C870-000E then generates a differential output voltage on the isolated side of the optical barrier, which is directly proportional to the input voltage. This output signal accurately represents the scaled DC link voltage.
Specifications:
Model Type: Isolation Amplifier
No. of Amplifiers: 1
Isolation Type: Optical
Isolation Voltage: 5kV
Supply Voltage Range: 3V to 5.5V
No. of Pins: 8 Pins
Gain Bandwidth Product: 100kHz
Features:
Advanced sigma-delta (Σ-D) modulation technology
Nominal input ranges from 0V to 2V
Low gain drift of -35ppm/°C
Offset voltage drift of 21mV/°C
0.1% (maximum) non-linearity
Active high shutdown pin
100 KHz wide bandwidth
Wide supply range from 3V to 5.5V for the output side
IEC/EN/DIN EN 60747-5-5, UL 1577, CSA approved
Operating temperature ranges from -40°C to 105°C
Package Included:
1 x BROADCOM ACPL-C870-000E Optically Isolated Voltage Sensor
Advanced sigma-delta (Σ-D) modulation technology
Nominal input ranges from 0V to 2V
Low gain drift of -35ppm/°C
Offset voltage drift of 21mV/°C
0.1% (maximum) non-linearity
Active high shutdown pin
100 KHz wide bandwidth
Wide supply range from 3V to 5.5V for the output side
IEC/EN/DIN EN 60747-5-5, UL 1577, CSA approved
Operating temperature ranges from -40°C to 105°C
| Model Type | Isolation Amplifier |
|---|---|
| No. of Amplifiers | 1 |
| Isolation Type | Optical |
| Isolation Voltage | 5kV |
| Supply Voltage Range | 3V to 5.5V |
| No. of Pins | 8 Pins |
| Gain Bandwidth Product | 100kHz |
More in Current & Voltage Sensors
The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die.
₹133.50 GST added at checkout
This 25V voltage detection sensor module is perfect for Arduino and microcontroller projects. It provides accurate DC voltage measurement for battery level monitoring, power supply
₹60.00 GST added at checkout
The ACS712-30A Current Sensor Module is a Hall Effect-based sensor designed for accurate AC and DC current measurement in electronic circuits and electrical systems.
₹99.00 GST added at checkout
The ACS712 5A Current Sensor Module is a high-precision Hall Effect Current Sensor designed to measure both AC and DC currents up to ±5A with excellent accuracy and electrical
₹111.00 GST added at checkout