0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino - RS1159
1 x 0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino
₹5698.50 GST added at checkout
SKU RS8437
The SEMTECH LoRa series module (Ra-06) is designed and developed by SEMTECH. The RA-06 module has built-in SX1278 RF chip and Huada ultra-low power 32-bit core cortex MO+ MCU
₹988.50
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Description:
The SEMTECH LoRa series module (Ra-06) is designed and developed by SEMTECH. The RA-06 module has built-in SX1278 RF chip and Huada ultra-low power 32-bit core cortex MO+ MCU HC32L130F8UA, SK Byte RAM, 64K Byte FLASH. This module is used for ultra-long distance spread spectrum communication, and its RF chip is SX1278. With SEMTECH's LoRa M patented modulation technology, SX1278 has a high sensitivity of more than -148dBm, a power output of +20dBm, a long transmission distance, and high reliability. At the same time, compared with traditional modulation technology, LoRa™ modulation technology also has obvious advantages in anti-blocking, solving the problem that traditional design solutions cannot take into account distance, anti-interference, and power consumption at the same time.
Specifications:
Model: RA-06
Antenna Form: IPEX Terminals/Through Hole Pads
Spectrum Range: 410MHz~525MHz
Working Temperature: -40°C ~ 85°C
Storage Environment: -40°C~125°C, <90%RH
Power Supply Range: 2.7~3.6V, typical value 3.3V, Current>300mA
Support Interface: SPI/URAT/I2C
Programmable Bit Rate: Upto 300kbps
Features:
LoRa™ Modem
With 8K Byte RAM and 64K Byte FLASH
Support FSK, GFSK, MSK, GMSK, LoRa™ and OOK modulation
Support frequency band 410MHz~525MHz
Operating voltage is 3.3V, maximum output +20dBm
Low power consumption in the receiving state, receiving current is 12.15mA, standby current is 1.6mA
High sensitivity: as low as -140dBm
Small size double row stamp hole patch package
Support customized firmware
The module uses SPI interface, half-duplex communication, CRC, up to 256 bytes of data packet engine
Useful Link:
Ai Thinker RA-06 LoRa Module
Package Included:
1 x Ai Thinker RA-06 LoRa Module
LoRa™ Modem
With 8K Byte RAM and 64K Byte FLASH
Support FSK, GFSK, MSK, GMSK, LoRa™ and OOK modulation
Support frequency band 410MHz~525MHz
Operating voltage is 3.3V, maximum output +20dBm
Low power consumption in the receiving state, receiving current is 12.15mA, standby current is 1.6mA
High sensitivity: as low as -140dBm
Small size double row stamp hole patch package
Support customized firmware
The module uses SPI interface, half-duplex communication, CRC, up to 256 bytes of data packet engine
| Model | RA-06 |
|---|---|
| Antenna Form | IPEX Terminals/Through Hole Pads |
| Spectrum Range | 410MHz~525MHz |
| Working Temperature | -40°C ~ 85°C |
| Storage Environment | -40°C~125°C, <90%RH |
| Power Supply Range | 2.7~3.6V, typical value 3.3V, Current>300mA |
| Support Interface | SPI/URAT/I2C |
| Programmable Bit Rate | Upto 300kbps |
More in LoRa Modules
1 x 0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino
₹5698.50 GST added at checkout
LoRa series module Ra-01Sc is designed and developed by Shenzhen Ai-Thinker This module is used for ultra-long distance spread spectrum Its RF chip LLCC68 mainly uses a LoRa™
₹433.50 GST added at checkout
This LoRa 433MHz module was designed by AI-THINKER, which is based on the chip SX1278. The SX1278 RF module is mainly used for long-range spread spectrum communication.
₹733.50 GST added at checkout