0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino - RS1159
1 x 0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino
₹5698.50 GST added at checkout
SKU RS8431
LoRa series module Ra-01Sc is designed and developed by Shenzhen Ai-Thinker This module is used for ultra-long distance spread spectrum Its RF chip LLCC68 mainly uses a LoRa™
₹433.50
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Description:
LoRa series module Ra-01Sc is designed and developed by Shenzhen Ai-Thinker Technology Co., Ltd. This module is used for ultra-long distance spread spectrum communication. Its RF chip LLCC68 mainly uses a LoRa™ remote modem for ultra-long distance spread spectrum communication, with strong anti-interference and low power consumption.
LLCC68 chip has a high sensitivity of over-129 dBm, a 20 dBm power output, a long transmission distance, and a high reliability with SEMTECHs LoRa ™ patent modulation technique. Meanwhile, compared with the traditional modulation technology, LoRa ™ provides significant advantages in both blocking and selectivity over conventional modulation techniques.
It solves the problem of simultaneously balancing the distance, the anti-interference and the power consumption, which the traditional design scheme can’t achieve. Application areas: automatic meter reading, supply chain and logistics, home building automation, security system, remote irrigation system.
Specifications:
Model: Ra-01SC
Package: SMD16
Antenna: Compatible with half-hole pad/through-hole pad (antennas need to be soldered)/IPEX
Frequency Range: 410MHz~525MHz
Operating Temperature: -40 ℃ ~ 85 ℃
Storage Environment: 40 ℃ ~ 125 ℃ , < 90%RH
Power Supply: 2.7~3.6V,typical value 3.3V,recommended current > 200mA
Support Interface: SPI
Programmable Bit Rate: Max up to 300Kbps
Crystal Frequency: 32MHz
Transmission Distance: In an open environment, this module matched with a spring antenna had a transmitting range of 2.8km, or matched with a suction cup antenna the transmitting range can reach 4.6km.
Features:
LoRa™ modem
Support FSK、GFSK、MSK、GMSK、LoRa™ and OOK mode
Frequency supports 410MHz~525MHz
Operating voltage is 3.3V, Max output transmitting power:+22dBm,Max current:140m
Low power consumption in a received state, the min received current is 4.2mA, stand-by current is 0.6mA
High sensitivity: As low as -129dBm
Support spreading factor: SF5/SF6/SF7/SF8/SF9/SF10/SF11
Small volume double-row stamp hole patch for SMD package
Adopts SPI interface, half-duplex communication, with CRC, up to 256-byte packet engine
Compatible with various antenna interfaces: stamp hole/round hole and IPEX, supports more scheme selection.
Pin Description:
No. Name Function Instruction
1 ANT Ground
2 GND Ground, connect to the power reference ground
3 3.3V Typical value 3.3V,recommended current > 200mA
4 RESET Reset
5 TXEN RF control port
6 DIO1 Digital IO1 software configuration
7 DIO2 Digital IO2 software configuration
8 DIO3 Digital IO3 software configuration
9 GND Ground
10 BUSY Status indicator pin(Be sure to connect to the IO port of the master MCU)
11 RXEN RF control port
12 SCK SPI clock input
13 MISO SPI data output
14 MOSI SPI data input
15 NSS SPI chip select input
16 GND Ground, connect to the power reference ground
Useful Link:
Ai-Thinker LoRa Ra-01SC Module
Package Included:
1 x Ai-Thinker LoRa Ra-01SC Module
LoRa™ modem
Support FSK、GFSK、MSK、GMSK、LoRa™ and OOK mode
Frequency supports 410MHz~525MHz
Operating voltage is 3.3V, Max output transmitting power:+22dBm,Max current:140m
Low power consumption in a received state, the min received current is 4.2mA, stand-by current is 0.6mA
High sensitivity: As low as -129dBm
Support spreading factor: SF5/SF6/SF7/SF8/SF9/SF10/SF11
Small volume double-row stamp hole patch for SMD package
Adopts SPI interface, half-duplex communication, with CRC, up to 256-byte packet engine
Compatible with various antenna interfaces: stamp hole/round hole and IPEX, supports more scheme selection.
| Model | Ra-01SC |
|---|---|
| Package | SMD16 |
| Antenna | Compatible with half-hole pad/through-hole pad (antennas need to be |
| soldered)/IPEX | |
| Frequency Range | 410MHz~525MHz |
| Operating Temperature | -40 ℃ ~ 85 ℃ |
| Storage Environment | 40 ℃ ~ 125 ℃ , < 90%RH |
| Power Supply | 2.7~3.6V,typical value 3.3V,recommended current > 200mA |
| Support Interface | SPI |
| Programmable Bit Rate | Max up to 300Kbps |
| Crystal Frequency | 32MHz |
| Transmission Distance | In an open environment, this module matched with a spring antenna had a transmitting range of 2.8km, or matched with a suction cup antenna the transmitting range can reach 4.6km. |
More in LoRa Modules
1 x 0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino
₹5698.50 GST added at checkout
This LoRa 433MHz module was designed by AI-THINKER, which is based on the chip SX1278. The SX1278 RF module is mainly used for long-range spread spectrum communication.
₹733.50 GST added at checkout
Ra-01 can be used for ultra-long distance spread spectrum communication, and compatible FSK remote modulation and demodulation quickly, to solve the traditional wireless design can
₹748.50 GST added at checkout