0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino - RS1159
1 x 0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino
₹5698.50 GST added at checkout
SKU RS8438
Ra-03SCH is a LoRa module developed by Shenzhen Ai-Thinker Technology Co., Ltd. This module is used for ultra-long-distance spread-spectrum communication.
₹493.50
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Description:
Ra-03SCH is a LoRa module developed by Shenzhen Ai-Thinker Technology Co., Ltd. This module is used for ultra-long-distance spread-spectrum communication. Its RF chip LLCC68mainly uses a LoRa™ remote modem for ultra-long-distance spread-spectrum communication. It has strong anti-interference and can minimize current consumption. With SEMTECH's LoRa™patented modulation technology, LLCC68 has a high sensitivity of over -129dBm, a transmit power of +22dBm, a long transmission distance, and high reliability. At the same time, compared with traditional modulation technology, LoRa™ modulation technology also has obvious advantages in anti-blocking and selection, which solves the problem that traditional design schemes cannot take into account distance and anti-interference. and power consumption at the same time.
Specifications:
Model: Ra-03SCH
Antenna: Half Hole Pad
Frequency: 803MHz~930MHz
Operating Temperature: -40℃ ~ 85℃
Storage Temperature: -40℃ ~ 125℃, < 90%RH
Power supply: Power supply voltage 2.7~3.6V,Typical value 3.3V,Current>200mA
Interface: SPI
Programmable Bit Rate: Up to 300kbps
Features:
Support FSK, GFSK, LoRa® modulation method
Support frequency band 803MHz~930MHz
The working voltage is 3.3V, the maximum output power is +22dBm, and the maximum working current is 140mA
Low power consumption in the receiving state, the minimum receiving current is 4.2mA, and the standby current is 0.6mA.
High sensitivity: as low as -129dBm
Support spreading factor SF5/SF6/SF7/SF8/SF9/SF10/SF11
Small-volume dual-stamp hole SMD package
The module adopts SPI interface, using half-duplex communication, with CRC, upto256bytes packet engine
The antenna interface is in the form of a half-hole pad, which can be connected to the motherboard for an external antenna.
Useful Link:
Ai-Thinker Ra-03SCH Lora Module
Package Included:
1 x Ai-Thinker Ra-03SCH Lora Module
Support FSK, GFSK, LoRa® modulation method
Support frequency band 803MHz~930MHz
The working voltage is 3.3V, the maximum output power is +22dBm, and the maximum working current is 140mA
Low power consumption in the receiving state, the minimum receiving current is 4.2mA, and the standby current is 0.6mA.
High sensitivity: as low as -129dBm
Support spreading factor SF5/SF6/SF7/SF8/SF9/SF10/SF11
Small-volume dual-stamp hole SMD package
The module adopts SPI interface, using half-duplex communication, with CRC, upto256bytes packet engine
The antenna interface is in the form of a half-hole pad, which can be connected to the motherboard for an external antenna.
| Model | Ra-03SCH |
|---|---|
| Antenna | Half Hole Pad |
| Frequency | 803MHz~930MHz |
| Operating Temperature | -40℃ ~ 85℃ |
| Storage Temperature | -40℃ ~ 125℃, < 90%RH |
| Power supply | Power supply voltage 2.7~3.6V,Typical value 3.3V,Current>200mA |
| Interface | SPI |
| Programmable Bit Rate | Up to 300kbps |
More in LoRa Modules
1 x 0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino
₹5698.50 GST added at checkout
LoRa series module Ra-01Sc is designed and developed by Shenzhen Ai-Thinker This module is used for ultra-long distance spread spectrum Its RF chip LLCC68 mainly uses a LoRa™
₹433.50 GST added at checkout
This LoRa 433MHz module was designed by AI-THINKER, which is based on the chip SX1278. The SX1278 RF module is mainly used for long-range spread spectrum communication.
₹733.50 GST added at checkout