0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino - RS1159
1 x 0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino
₹5698.50 GST added at checkout
SKU RS8436
Ra-01SCH-P is a LoRa series module designed and developed by Shenzhen Ai-Thinker This module is used for ultra-long-distance spread-spectrum communication.
₹748.50
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Description:
Ra-01SCH-P is a LoRa series module designed and developed by Shenzhen Ai-Thinker Technology Co., Ltd. This module is used for ultra-long-distance spread-spectrum communication. Its RF chip LLCC68+ mainly uses LoRa™ long-range modem for ultra-long distance spread spectrum communication, with strong anti-interference and the ability to minimize current consumption. With the help of SEMTECH's LoRa™ patented modulation technology, the module has a built-in power amplifier (PA) and low noise amplifier (LNA) on this basis, with high sensitivity exceeding -137dBm, +29dBm transmission power, long transmission distance, and high reliability.
At the same time, compared with traditional modulation technology, LoRa™ modulation technology also has obvious advantages in anti-blocking and selection, solving the problem that traditional design solutions cannot take into account distance, anti-interference, and power consumption at the same time.
Specifications:
Model: Ra-01SCH-P
Antenna: Compatible with half-hole pad/through-hole pad/IPEX connector
Frequency: 803MHz~930MHz
Operating temperature: -40℃~ 85℃
Storage temperature: -40℃~ 125℃, < 90%RH
Power supply: Supply voltage 3.0~3.6V, typical value 3.3V, current greater than1A
Interface: SPI
Programmable bit rate: Up to 300kbps
Features:
Support FSK, GFSK, LoRa® modulation
Support frequency band: 803MHz~930MHz
Maximum transmit power is optional (see the design guide below for the configuration method) ① Default configuration: The internal PA uses a 3.3V power supply voltage. In this state, the maximum Tx Power can reach +29dBm, and the operating current is 750mA; ② Optional configuration: The internal PA uses a 5V power supply voltage. In this state, the maximum Tx Power can reach +31dBm, and the operating current is 1A;
High sensitivity: as low as -137dBm@SF10 125KHz
Extremely small size 17*16*3.2(±0.2)MM, double row stamp hole patch package Support spreading factors SF5/SF6/SF7/SF8/SF9/SF10/SF11
It has low power consumption in the receiving state, and the minimum receiving current is 16mA.
The module uses an SPI interface, half-duplex communication, CRC, and up to 256 bytes of data packet engine.
Support a variety of antenna installation methods, compatible with half-hole pad/through-hole pad/IPEX connector.
Useful Link:
Ai Thinker Ra-01SCH-P LoRa Module
Package Included:
1 x Ai Thinker Ra-01SCH-P LoRa Module
Support FSK, GFSK, LoRa® modulation
Support frequency band: 803MHz~930MHz
Maximum transmit power is optional (see the design guide below for the configuration method) ① Default configuration: The internal PA uses a 3.3V power supply voltage. In this state, the maximum Tx Power can reach +29dBm, and the operating current is 750mA; ② Optional configuration: The internal PA uses a 5V power supply voltage. In this state, the maximum Tx Power can reach +31dBm, and the operating current is 1A;
High sensitivity: as low as -137dBm@SF10 125KHz
Extremely small size 17*16*3.2(±0.2)MM, double row stamp hole patch package Support spreading factors SF5/SF6/SF7/SF8/SF9/SF10/SF11
It has low power consumption in the receiving state, and the minimum receiving current is 16mA.
The module uses an SPI interface, half-duplex communication, CRC, and up to 256 bytes of data packet engine.
Support a variety of antenna installation methods, compatible with half-hole pad/through-hole pad/IPEX connector.
| Model | Ra-01SCH-P |
|---|---|
| Antenna | Compatible with half-hole pad/through-hole pad/IPEX connector |
| Frequency | 803MHz~930MHz |
| Operating temperature | -40℃~ 85℃ |
| Storage temperature | -40℃~ 125℃, < 90%RH |
| Power supply | Supply voltage 3.0~3.6V, typical value 3.3V, current greater than1A |
| Interface | SPI |
| Programmable bit rate | Up to 300kbps |
More in LoRa Modules
1 x 0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino
₹5698.50 GST added at checkout
LoRa series module Ra-01Sc is designed and developed by Shenzhen Ai-Thinker This module is used for ultra-long distance spread spectrum Its RF chip LLCC68 mainly uses a LoRa™
₹433.50 GST added at checkout
This LoRa 433MHz module was designed by AI-THINKER, which is based on the chip SX1278. The SX1278 RF module is mainly used for long-range spread spectrum communication.
₹733.50 GST added at checkout