0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino - RS1159
1 x 0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino
₹5698.50 GST added at checkout
SKU RS8435/RS5692
Ra-01SCH is a LoRa series module designed and developed by Ai-Thinker Technology. The module is used for ultra-long-range extended frequency communication, and its radio frequency
₹598.50
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Description:
Ra-01SCH is a LoRa series module designed and developed by Ai-Thinker Technology. The module is used for ultra-long-range extended frequency communication, and its radio frequency chip LLCC68 mainly uses LoRa™ remote modem, which is used for ultra-long-range extended frequency communication. It has strong anti-interference resistance and can minimize current consumption. With the help of SEMTECH's LoRa™patented modulation technology, the LLCC68 has high sensitivity over 129dBm, + 22dBm transmission power, long-range transmission, and high reliability.
At the same time, compared with the traditional modulation technology, LoRa™ modulation technology also has obvious advantages in anti-blocking and selection, which solves the problem that the traditional design scheme cannot take into account the distance, anti-interference, and power consumption simultaneously
Specifications:
Model: Ra-01SCH
Antenna: Compatible with half-hole pad / through-hole pad (welded antenna required) / IPEX holder
Frequency Range: 803MHz~930MHz
Operating Temperature: -40℃ ~ 85℃
Storage Temperature: -40℃ ~ 125℃, < 90%RH
Power Supply: The power supply voltage is 2.7~3.6V, the typical value is 3.3V, and the current is greater than 200mA
Interface: SPI
Programmable bit rate: Up to300kbps
Features:
Support FSK, GFSK, and LoRa® modulation mode
Support frequency range 803MHz~930MHz
The operating voltage is 3.3V, the maximum output power is + 22dBm, and the maximum working current is 120mA
The RX state has low power consumption characteristics, the lowest RXcurrent is 4.2mA, and the standby current is 0.6mA
High sensitivity: as low as-129dBm
Support for the expansion factor SF5/SF6/SF7/SF8/SF9/SF10/SF11
Small volume double-column stamp hole patch package
The module adopts an SPI interface, half-duplex communication, and with CRC, a packet engine of up to 256 bytes
The antenna interface is compatible with stamp hole /through-hole and IPEX, which support more scheme selection
Pin Description:
No. Name Function
1 ANT Connect antenna
2 GND Ground
3 3V3 Typical power supply value 3.3V
4 RESET Reset pin
5 TXEN RF control port
6 DIO1 Digital IO1 software configuration
7 DIO2 Digital IO2 software configuration
8 DIO3 Digital IO3 software configuration
9 GND Ground
10 BUSY Status indicator pins, which must be connected to the IOport of the master MCU
11 RXEN RF control port
12 SCK SPI clock input
13 MISO SPI data output
14 MOSI SPI data input
15 NSS SPI selection input
16 GND Ground
Useful link:
Ai-Thinker Ra-01SCH LoRaWAN Module
Package Included:
1 x Ai-Thinker Ra-01SCH LoRaWAN Module
Support FSK, GFSK, and LoRa® modulation mode
Support frequency range 803MHz~930MHz
The operating voltage is 3.3V, the maximum output power is + 22dBm, and the maximum working current is 120mA
The RX state has low power consumption characteristics, the lowest RXcurrent is 4.2mA, and the standby current is 0.6mA
High sensitivity: as low as-129dBm
Support for the expansion factor SF5/SF6/SF7/SF8/SF9/SF10/SF11
Small volume double-column stamp hole patch package
The module adopts an SPI interface, half-duplex communication, and with CRC, a packet engine of up to 256 bytes
The antenna interface is compatible with stamp hole /through-hole and IPEX, which support more scheme selection
| Model | Ra-01SCH |
|---|---|
| Antenna | Compatible with half-hole pad / through-hole pad (welded antenna required) / IPEX holder |
| Frequency Range | 803MHz~930MHz |
| Operating Temperature | -40℃ ~ 85℃ |
| Storage Temperature | -40℃ ~ 125℃, < 90%RH |
| Power Supply | The power supply voltage is 2.7~3.6V, the typical value is 3.3V, and the current is greater than 200mA |
| Interface | SPI |
| Programmable bit rate | Up to300kbps |
More in LoRa Modules
1 x 0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino
₹5698.50 GST added at checkout
LoRa series module Ra-01Sc is designed and developed by Shenzhen Ai-Thinker This module is used for ultra-long distance spread spectrum Its RF chip LLCC68 mainly uses a LoRa™
₹433.50 GST added at checkout
This LoRa 433MHz module was designed by AI-THINKER, which is based on the chip SX1278. The SX1278 RF module is mainly used for long-range spread spectrum communication.
₹733.50 GST added at checkout