0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino - RS1159
1 x 0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino
₹5698.50 GST added at checkout
SKU RS8430
Ra-01S-P is a LoRa series module designed and developed by Shenzhen Ai-Thinker This module is used for ultra-long distance spread spectrum communication.
₹637.50
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Description:
Ra-01S-P is a LoRa series module designed and developed by Shenzhen Ai-Thinker Technology Co., Ltd. This module is used for ultra-long distance spread spectrum communication. Its RF chip SX1268 mainly uses a LoRa™ long-range modem for ultra-long distance spread spectrum communication, with strong anti-interference and the ability to minimize current consumption. With the help of SEMTECH's LoRa™ patented modulation technology.
The module has a built-in power amplifier (PA) and low-noise amplifier (LNA) on this basis, with a high sensitivity of more than -137dBm, +29dBm transmission power, long transmission distance, and high reliability. At the same time, compared with traditional modulation technology, LoRa™ modulation technology also has obvious advantages in anti-blocking and selection, solving the problem that traditional design solutions cannot take into account distance, anti-interference, and power consumption at the same time.
It can be widely used in automatic meter reading, home building automation, security systems, remote irrigation systems, etc.
Specifications:
Model: Ra-01S-P
Package: SMD-16
Size: 17*16*3.2(±0.2)mm
Antenna: Compatible with half-hole pad/through-hole pad/IPEX connector
Frequency: 410MHz~525MHz
Operating Temperature: -40℃~ 85℃
Storage Temperature: -40℃~ 125℃, < 90%RH
Power Supply: Supply voltage 3.0~3.6V, typical value 3.3V, current>1A
Interface: SPI
Programmable Bit Rate: Up to 300kbps
Features:
Support FSK、GFSK、LoRa® modulation
Support frequency band: 410MHz~525MHz
Maximum transmit power +29dBm, operating current 700mA
High sensitivity: as low as -137dBm@SF10 125KHz
Extremely small size 17*16*3.2(±0.2)MM, double-row stamp hole patch package
Support spreading factors SF5/SF6/SF7/SF8/SF9/SF10/SF11/SF12
It has low power consumption in the receiving state, and the minimum receiving current is 11mA
The module uses an SPI interface, half-duplex communication, CRC, and up to 256 bytes of data packet engine
Supports a variety of antenna installation methods, compatible with half-hole pads/through-hole pads/IPEX connector
Pin Description:
No. Name Functions
1 ANT Connect antenna
2 GNT Ground
3 3V3 Typical value 3.3V power supply
4 RESET Reset pin
5 CPS FEM chip TX pass-through enable pin, in transmit mode, this pin is lowlevel R F and is directly output without PA amplification, and is internallypulled up by default
6 D101 Digital IO1 software configuration
7 D102 Digital IO2 software configuration
8 D103 Digital IO3 software configuration
9 GND Ground
10 NSS SPI chip select input
11 MOSI SPI data input
12 MISO SPI data output
13 SCK SPI clock input
14 RF-EN FEM chip enable pin, high level is effective, the module is pulled upbydefault; High level is in working state, low level is in sleep state
15 BUSY Status indication pin
16 GND Ground
Useful Link:
Ai-Thinker Ra-01S LoRa Module
Package Included:
1 x Ai-Thinker Ra-01S-P LoRa Module
Support FSK、GFSK、LoRa® modulation
Support frequency band: 410MHz~525MHz
Maximum transmit power +29dBm, operating current 700mA
High sensitivity: as low as -137dBm@SF10 125KHz
Extremely small size 17*16*3.2(±0.2)MM, double-row stamp hole patch package
Support spreading factors SF5/SF6/SF7/SF8/SF9/SF10/SF11/SF12
It has low power consumption in the receiving state, and the minimum receiving current is 11mA
The module uses an SPI interface, half-duplex communication, CRC, and up to 256 bytes of data packet engine
Supports a variety of antenna installation methods, compatible with half-hole pads/through-hole pads/IPEX connector
| Model | Ra-01S-P |
|---|---|
| Package | SMD-16 |
| Size | 17*16*3.2(±0.2)mm |
| Antenna | Compatible with half-hole pad/through-hole pad/IPEX connector |
| Frequency | 410MHz~525MHz |
| Operating Temperature | -40℃~ 85℃ |
| Storage Temperature | -40℃~ 125℃, < 90%RH |
| Power Supply | Supply voltage 3.0~3.6V, typical value 3.3V, current>1A |
| Interface | SPI |
| Programmable Bit Rate | Up to 300kbps |
More in LoRa Modules
1 x 0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino
₹5698.50 GST added at checkout
LoRa series module Ra-01Sc is designed and developed by Shenzhen Ai-Thinker This module is used for ultra-long distance spread spectrum Its RF chip LLCC68 mainly uses a LoRa™
₹433.50 GST added at checkout
This LoRa 433MHz module was designed by AI-THINKER, which is based on the chip SX1278. The SX1278 RF module is mainly used for long-range spread spectrum communication.
₹733.50 GST added at checkout