0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino - RS1159
1 x 0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino
₹5698.50 GST added at checkout
SKU RS5715
This LoRa Ra-01S module is used for ultra-long-distance spread-spectrum communication. LoRa Ra-01S radio chip SX1268 mainly uses LoRa remote mode for ultra-long-distance
₹675.00
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Description:
This LoRa Ra-01S module is used for ultra-long-distance spread-spectrum communication. LoRa Ra-01S radio chip SX1268 mainly uses LoRa remote mode for ultra-long-distance spread-spectrum communication. LoRa Ra-01S has strong anti-interference and can minimize current consumption. With SEMTECH’s LoRa patented modulation technology, SX1268 has a high sensitivity of over -148dBm, a power output of +22dBm, a long transmission distance, and high reliability.
At the same time, compared to traditional modulation technology, LoRa modulation technology also has obvious advantages in anti-blocking and selection, which solves the problem of distance, anti-interference, and power consumption that traditional design solutions cannot simultaneously take into account.
Specifications:
Model: Ra-01S
Package: SMD16
Antenna: Compatible with half-hole pads/through-hole pads (need to solder the antenna)/IPEX socket
Spectrum range: 410MHz~525MHz
Operating temperature: -40℃ ~ 85℃
Storage environment: -40℃ ~ 125℃ , 90%RH
Power Supply: 2.7~3.6V,default 3.3V,current > 200mA
Interface: SPI
Programma ble bit rate: Up to 300kbps
Features:
Supports FSK, GFSK, MSK, GMSK, LoRa™, and OOK modulation methods
Supports frequency band 410MHz~525MHz
Working voltage is 3.3V, maximum output is +22dBm, maximum working current is140mA
Low power consumption characteristics in the receiving state, the minimum receiving current is 4.5 mA, and the standby current is 1.6 mA
High sensitivity: as low as -140dBm
Small-volume dual-row stamp hole patch package
The LoRa Ra-01S adopts an SPI interface, half-duplex communication, with CRC, up to 256-byte packet engine
Package Included:
1 x Ai-Thinker LoRa Ra-01S Spread Spectrum Wireless Module
Supports FSK, GFSK, MSK, GMSK, LoRa™, and OOK modulation methods
Supports frequency band 410MHz~525MHz
Working voltage is 3.3V, maximum output is +22dBm, maximum working current is140mA
Low power consumption characteristics in the receiving state, the minimum receiving current is 4.5 mA, and the standby current is 1.6 mA
High sensitivity: as low as -140dBm
Small-volume dual-row stamp hole patch package
The LoRa Ra-01S adopts an SPI interface, half-duplex communication, with CRC, up to 256-byte packet engine
| Model | Ra-01S |
|---|---|
| Package | SMD16 |
| Antenna | Compatible with half-hole pads/through-hole pads (need to solder the antenna)/IPEX socket |
| Spectrum range | 410MHz~525MHz |
| Operating temperature | -40℃ ~ 85℃ |
| Storage environment | -40℃ ~ 125℃ , 90%RH |
| Power Supply | 2.7~3.6V,default 3.3V,current > 200mA |
| Interface | SPI |
| Programma ble bit rate | Up to 300kbps |
More in LoRa Modules
1 x 0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino
₹5698.50 GST added at checkout
LoRa series module Ra-01Sc is designed and developed by Shenzhen Ai-Thinker This module is used for ultra-long distance spread spectrum Its RF chip LLCC68 mainly uses a LoRa™
₹433.50 GST added at checkout
This LoRa 433MHz module was designed by AI-THINKER, which is based on the chip SX1278. The SX1278 RF module is mainly used for long-range spread spectrum communication.
₹733.50 GST added at checkout