0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino - RS1159
1 x 0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino
₹5698.50 GST added at checkout
SKU RS8433/RS5694
Anxinke LoRa series modules (Ra-01SH) are designed and developed by Anxinke Technology. This module is used for ultra-long-distance spread-spectrum communication.
₹898.50
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Description:
Anxinke LoRa series modules (Ra-01SH) are designed and developed by Anxinke Technology. This module is used for ultra-long-distance spread-spectrum communication. Its radio chip SX1262 mainly uses a LoRa™remote modem for ultra-long-distance spread-spectrum communication.
It has strong anti-interference and can minimise current consumption. With SEMTECH's LoRa™patentedmodulation technology, SX1262 has a high sensitivity of over -148dBm, a power output of +22dBm, a long transmission distance, and high reliability.
At the same time, compared to traditional modulation technology, LoRa™modulation technology also has obvious advantages in anti-blocking and selection, which solves the problem of distance, anti-interference, and power consumption that traditional design solutions cannot simultaneously take into account. Application areas are used in automatic meter reading, home building automation, security systems, and remote irrigation systems
Specifications:
Model: Ra-01SH
Package: SMD16
Antenna: Compatible with half-hole pads/through-hole pads (need to solder the antenna)/IPEX socket
Spectrum Range: 803MHz~930MHz
Operating Temperature: -40 ℃ ~ 85 ℃
Storage Environment: -40 ℃ ~ 125 ℃ , 90%RH
Power Supply: 2.7~3.6V,default 3.3V,current > 200mA
Interface: SPI
Programmable Bit Rate: Up to 300kbps
Features:
LoRa™ modem
Support FSK, GFSK, MSK, GMSK, LoRa™, and OOK modulation methods
Support frequency band 803MHz~930MHz
Working voltage is 3.3V, maximum output is +22dBm, maximum working current is140mA
Low power consumption characteristics in the receiving state, the minimum receiving current is 4.2 mA, standby current is 1.6mA
High sensitivity: as low as -140dBm
Small volume dual row stamp hole patch package
The module adopts SPI interface, half-duplex communication, with CRC, upto256-byte packet engine
Useful link:
Ai-Thinker LoRa Ra-01SH Module
Package Included:
1 x Ai-Thinker LoRa Ra-01SH Module
LoRa™ modem
Support FSK, GFSK, MSK, GMSK, LoRa™, and OOK modulation methods
Support frequency band 803MHz~930MHz
Working voltage is 3.3V, maximum output is +22dBm, maximum working current is140mA
Low power consumption characteristics in the receiving state, the minimum receiving current is 4.2 mA, standby current is 1.6mA
High sensitivity: as low as -140dBm
Small volume dual row stamp hole patch package
The module adopts SPI interface, half-duplex communication, with CRC, upto256-byte packet engine
| Model | Ra-01SH |
|---|---|
| Package | SMD16 |
| Antenna | Compatible with half-hole pads/through-hole pads (need to solder the antenna)/IPEX socket |
| Spectrum Range | 803MHz~930MHz |
| Operating Temperature | -40 ℃ ~ 85 ℃ |
| Storage Environment | -40 ℃ ~ 125 ℃ , 90%RH |
| Power Supply | 2.7~3.6V,default 3.3V,current > 200mA |
| Interface | SPI |
| Programmable Bit Rate | Up to 300kbps |
More in LoRa Modules
1 x 0.96 OLED Display ESP32 ESP-32S WIFI BT Lora Module Board Antenna Transceiver for Arduino
₹5698.50 GST added at checkout
LoRa series module Ra-01Sc is designed and developed by Shenzhen Ai-Thinker This module is used for ultra-long distance spread spectrum Its RF chip LLCC68 mainly uses a LoRa™
₹433.50 GST added at checkout
This LoRa 433MHz module was designed by AI-THINKER, which is based on the chip SX1278. The SX1278 RF module is mainly used for long-range spread spectrum communication.
₹733.50 GST added at checkout