About this product
Description:
This is AD22A08 DC 12V 8CH DTMF Relay with Channel Relay Module any phone or fixed telephone with a DTMF key code remotely controls product relay open and close The majority of smartphones and function machines are DTMF code Working voltage DC 12V, with reverse polarity protection.
Specifications:
Model: AD22A08
Working Voltage: DC 12V
Maximum Load: 10A/250VAC, 10A/125VAC, 10A/30VDC, 10A/28VDC, 10A/12VDC
Features:
Standby 11-13 MA, 1 relay open 44MA, 2 relays Open 77MA, 3 relays Open 110MA, 4 relays open 140MA, 5 relays open 170MA, 6 relays open 197MA, 7 relays open 223MA, 8 relays open 247MA.
Eight modes of operation, Non-locking (Momentary ), self-locking (Toggle),inter-locking(Latch), 5/20/60/120/250-second delay.
The default control command is 1/2/3/4/5/6/7/8. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4; control commands can be changed any 1-4 bits.
Glossary:
NO: Normal open
COM: Common terminal
NC: Normal Connect
Relay open: COM connected NO but disconnected NC
Relay close: COM disconnected NO but NC connected COM.
Non-locking (Momentary ): Dial 1 (2/3/4 is the same), relay 1 "Open", relay close after 1 second delay.
Self-locking: Dial 1, relay 1 "Open", dial 1 again, relay 1 "off", and so on
Inter-lock: Dial 1, relay 1 "Open", other relays "Off"; dial 2, relay 2 "Open", other relays "off", and so on "Delay": Dial 1, relay 1 "Open", relay 1 "Close" after a time.
Caution:
DTMF audio controller must use stable work of DC 12V power supply (recommendations 2A or above the power adapter)
Remote control the controller by a mobile phone, the receiver must be the phone with a 3.5MM audio interface, and the transmitter can be a cell phone or landline
The receiver of the phone must output a sound (not muted), or they will not control relays.
Package Included:
1 x Relay Module
1 x 3.5mm Audio Cable
Standby 11-13 MA, 1 relay open 44MA, 2 relays Open 77MA, 3 relays Open 110MA, 4 relays open 140MA, 5 relays open 170MA, 6 relays open 197MA, 7 relays open 223MA, 8 relays open 247MA.
Eight modes of operation, Non-locking (Momentary ), self-locking (Toggle),inter-locking(Latch), 5/20/60/120/250-second delay.
The default control command is 1/2/3/4/5/6/7/8. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4; control commands can be changed any 1-4 bits.