20A range ACS712 current sensor module Detector - RS406
The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die.
₹133.50 GST added at checkout
SKU REES-B46512ADB6972A81
The heart of the ACS712 lies in a precise, low-offset, linear Hall-effect sensor circuit. This sophisticated circuit is designed to accurately measure magnetic fields and convert
₹405.00
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Description:
The heart of the ACS712 lies in a precise, low-offset, linear Hall-effect sensor circuit. This sophisticated circuit is designed to accurately measure magnetic fields and convert them into proportional voltage outputs. A critical component of the IC is its integrated copper conduction path. This carefully designed path is situated very close to the surface of the die, optimizing the interaction between the current being measured and the Hall-effect sensor.
Specifications:
Item Type: Current Sensor
Model Type: Current Sensor IC
Input Voltage: 5V
Reverse voltage: -0.1V
Supply Current: 10mA
Frequency Bandwidth: 80 KHz
Rise Time: 5μs
Output Capacitance Load: 10nF
Sensitivity: 100mV/A
Operating Temperature: –40 ~ +85°C
Features:
The low-noise analog signal path.
Device bandwidth is set via the new FILTER pin.
5 μs output rise time in response to step input current.
80 kHz bandwidth.
Total output error 1.5% at TA = 25°C.
Small footprint, low-profile SOIC8 package.
1.2 mΩ internal conductor resistance.
2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
5.0 V, single-supply operation.
66 to 185 mV/A output sensitivity.
Output voltage proportional to AC or DC currents.
Factory-trimmed for accuracy.
Extremely stable output offset voltage.
Nearly zero magnetic hysteresis.
Ratiometric output from a supply voltage.
Package Included:
1 x ACS712 20A Current Sensor IC (ACS712ELCTR-20A-T)
The low-noise analog signal path.
Device bandwidth is set via the new FILTER pin.
5 μs output rise time in response to step input current.
80 kHz bandwidth.
Total output error 1.5% at TA = 25°C.
Small footprint, low-profile SOIC8 package.
1.2 mΩ internal conductor resistance.
2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
5.0 V, single-supply operation.
66 to 185 mV/A output sensitivity.
Output voltage proportional to AC or DC currents.
Factory-trimmed for accuracy.
Extremely stable output offset voltage.
Nearly zero magnetic hysteresis.
Ratiometric output from a supply voltage.
| Item Type | Current Sensor |
|---|---|
| Model Type | Current Sensor IC |
| Input Voltage | 5V |
| Reverse voltage | -0.1V |
| Supply Current | 10mA |
| Frequency Bandwidth | 80 KHz |
| Rise Time | 5μs |
| Output Capacitance Load | 10nF |
| Sensitivity | 100mV/A |
| Operating Temperature | –40 ~ +85°C |
More in Current & Voltage Sensors
The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die.
₹133.50 GST added at checkout
This 25V voltage detection sensor module is perfect for Arduino and microcontroller projects. It provides accurate DC voltage measurement for battery level monitoring, power supply
₹60.00 GST added at checkout
The ACS712-30A Current Sensor Module is a Hall Effect-based sensor designed for accurate AC and DC current measurement in electronic circuits and electrical systems.
₹99.00 GST added at checkout
The ACS712 5A Current Sensor Module is a high-precision Hall Effect Current Sensor designed to measure both AC and DC currents up to ±5A with excellent accuracy and electrical
₹111.00 GST added at checkout