10 x 15 cm FR4 Copper Clad Plate Laminate Single Side PCB - RS2610
This Is A High Quality Single Sided Fr2 / Phenolic General Purpose PCB. It Is Used For Rapid Prototyping Design.
₹120.00 GST added at checkout
SKU RS431
This 9 × 15 cm double-sided universal PCB prototype board is an excellent choice for makers, hobbyists, and engineers needing a reliable platform for building custom circuits.
₹225.00
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Description:
This 9 × 15 cm double-sided universal PCB prototype board is an excellent choice for makers, hobbyists, and engineers needing a reliable platform for building custom circuits. It’s made of high-quality FR-4 and supports plated through-holes on both sides, with a standard 2.54 mm (0.1 inch) hole pitch for easy integration with DIP components, headers, and modules.
Specifications:
Type: PCB Prototype Board
Dimension: 9 x 15 cm
Material: Glass Fibre FR-4
Features:
Dimensions: 9 cm × 15 cm (approx. 3.54″ × 5.91″)
Board thickness: ~ 1.6 mm FR-4 substrate
Plated through-holes on both sides for double-sided component mounting
Standard 2.54 mm (0.1 inch) hole spacing (compatible with most DIP / header / module pins)
Copper plating (HASL / tinned finish) for better solderability
Lightweight: around 40 g per board
Green solder mask (common default)
Applications:
Ideal for:
Prototyping electronic circuits
DIY/custom PCBs (hobby / school / makers)
Arduino / microcontroller breakout designs
Sensor boards, driver circuits, amplifier modules
Testing and proof-of-concept circuits
Usage Tips & Best Practices:
Plan component layout first, then route wiring to minimise crossovers.
Use vias or small wire jumpers to connect top and bottom traces where needed.
Use proper flux and soldering technique to avoid lifting pads.
Avoid overheating; FR-4 can warp if overheated repeatedly.
Clean flux residues after soldering for better reliability.
Package Included:
1 x 9 x 15 CM Double-Sided universal PCB prototype board
Dimensions: 9 cm × 15 cm (approx. 3.54″ × 5.91″)
Board thickness: ~ 1.6 mm FR-4 substrate
Plated through-holes on both sides for double-sided component mounting
Standard 2.54 mm (0.1 inch) hole spacing (compatible with most DIP / header / module pins)
Copper plating (HASL / tinned finish) for better solderability
Lightweight: around 40 g per board
Green solder mask (common default)
| Type | PCB Prototype Board |
|---|---|
| Dimension | 9 x 15 cm |
| Material | Glass Fibre FR-4 |
More in ICs & Prototyping
This Is A High Quality Single Sided Fr2 / Phenolic General Purpose PCB. It Is Used For Rapid Prototyping Design.
₹120.00 GST added at checkout
The universal PCB board is easy to weld diode, resistor, transistor, capacitor, etc. With referencing letters and numbers printed on the Single side for easy reference of
₹31.50 GST added at checkout
This is a 12" x 12" (30 cm x 30 cm) copper-clad PCB. This copper clad is perfect for hobbyists & electronics engineers who have tried successfully making their own single-sided
₹247.50 GST added at checkout
The 12x18cm Double Sided PCB Board Tinned Through Holes Universal Printed Circuit Proto Board. This means the PCB has copper traces (conductors) on both sides of the board.
₹171.00 GST added at checkout