10 x 15 cm FR4 Copper Clad Plate Laminate Single Side PCB - RS2610
This Is A High Quality Single Sided Fr2 / Phenolic General Purpose PCB. It Is Used For Rapid Prototyping Design.
₹120.00 GST added at checkout
SKU IN000357
The 74HC27 contains three independent NOR gates, each with three logic inputs and one output. A gate's output is HIGH only when all three of its inputs are LOW.
₹43.50
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
74HC27 Triple 3-Input NOR Gate IC The 74HC27 contains three independent NOR gates, each with three logic inputs and one output. A gate's output is HIGH only when all three of its inputs are LOW. Any HIGH input makes that gate's output LOW. This HC-family logic IC comes in a 14-pin through-hole DIP package for compatible breadboards, sockets and PCBs. It is useful for learning Boolean logic, combining digital conditions and building simple signal-control circuits. Features
Three separate 3-input NOR gates in one IC.
Each output implements NOT (A OR B OR C).
HC CMOS logic family.
DIP-14 through-hole package.
Common supply pins for all three gates.
Specifications
Part family 74HC27
Function Triple 3-input NOR
Gates 3 independent gates
Inputs per gate 3
Outputs 3, one per gate
Package DIP-14, through-hole
HC-family supply range 2V to 6V; confirm the supplied manufacturer's datasheet
Supply pins VCC pin 14; GND pin 7
Gate pin reference
Gate A B C Y
1 1 2 13 12
2 3 4 5 6
3 9 10 11 8
Use and handling Use HC-compatible logic levels and keep input voltages within the permitted supply range. Verify timing and output loading in the actual part's datasheet. Add a 0.1uF bypass capacitor near VCC and GND. Tie unused inputs to a defined HIGH or LOW level; leave unused outputs unconnected. Check the notch and pin numbering before powering the circuit. Do not connect outputs together or use this logic IC to drive motors or other power loads directly. Package includes 1 x 74HC27 DIP-14 IC. Photos show representative marked SN74HC27 DIP-14 packages; manufacturer and batch markings may vary. The pinout, truth table and gate-map images are original illustrative references based on the TI SN74HC27 datasheet, not photographs of supplied stock. TI SN74HC27 reference datasheet
Three separate 3-input NOR gates in one IC.
Each output implements NOT (A OR B OR C).
HC CMOS logic family.
DIP-14 through-hole package.
Common supply pins for all three gates.
| Part family | |
| 74HC27 | |
| Function | |
| Triple 3-input NOR | |
| Gates | |
| 3 independent gates | |
| Inputs per gate | |
| 3 | |
| Outputs | |
| 3, one per gate | |
| Package | |
| DIP-14, through-hole | |
| HC-family supply range | |
| 2V to 6V; confirm the supplied manufacturer's datasheet | |
| Supply pins | |
| VCC pin 14; GND pin 7 |
More in ICs & Prototyping
This Is A High Quality Single Sided Fr2 / Phenolic General Purpose PCB. It Is Used For Rapid Prototyping Design.
₹120.00 GST added at checkout
The universal PCB board is easy to weld diode, resistor, transistor, capacitor, etc. With referencing letters and numbers printed on the Single side for easy reference of
₹31.50 GST added at checkout
This is a 12" x 12" (30 cm x 30 cm) copper-clad PCB. This copper clad is perfect for hobbyists & electronics engineers who have tried successfully making their own single-sided
₹247.50 GST added at checkout
The 12x18cm Double Sided PCB Board Tinned Through Holes Universal Printed Circuit Proto Board. This means the PCB has copper traces (conductors) on both sides of the board.
₹171.00 GST added at checkout